Knowledge Base
WAN
- What to do if the NAT/ VPN Performance is lower than expected?
- The different LTE status and the meanings on Vigor LTE Router
- What is NAT loopback?
VPN
- WireGuard VPN from Windows to Vigor Router
- IPsec XAuth from iOS to Vigor Router
- EasyVPN from Linux to Vigor Router by EasyVPN Client Tool for Linux
VDSL/ADSL
- How to Improve DSL Speed
- Use Vigor130 as a Bridge
- Difference between Bridge mode and Full Bridge mode on Vigor165
LAN
Applications
- Give a Hostname to a LAN server by LAN DNS
- How to use Bandwidth Limit
- Port-Based Access Control by Wired 802.1X
Routing
- Introduction to Route Policy
- Designate a outgoing WAN for traffic to a certain Website
- Set up BGP Routing between Vigor Routers
Firewall &
Content Filtering
- Use DNS Filter and local DNS server at the same time
- Differences among Port Redirection, Open Ports and DMZ
- How to enable firewall during working hours?
Security
- DNS Security
- Use 2-Step Authentication for Remote Access
- Use TOTP as Two Factor Authentication (2FA) for Remote Access
VoIP
- Upgrade the System Prompt
- Upgrade the firmware of VigorIPPBX 3510 by Firmware Upgrade Program
- Register the router to a SIP server
Wireless
- How to set up a mesh network on VigorAP using DrayTek Wireless App
- Collect Wireless Debug Log on Vigor AP
- Connecting to the Wi-Fi using default password
Switch
- Deploying VLANs by SWM and VigorSwitch
- ONVIF Surveillance Introduction
- Using VigorConnect to monitor the Traffic by sFlow
Latest Articles
- Activate the Free Trial License for URL/IP Reputation Service
- Sending Notifications via Microsoft 365 Mail Server with OAuth 2.0
- Troubleshoot an unexpected router reboot
- Renew License Key for URL/IP Reputation Service
- Threat Protection - Safe Browsing
- Manage Switches in Stacking
- VPN Matcher for DrayOS 5 Vigor Routers
- IPsec Tunnel between two DrayTek Routers using the same IP subnet
- Blocking Social Networking Websites by Threat Protection
- Three-Site VPN Communication
Top Articles
- How to login my Vigor Router
- Use Multiple LAN Subnets with Tag-Based VLAN
- Solve the Can't find VPPP adapter Error of Smart VPN Client
- Ways to fix the VPN No PPP Control Protocols Configured Error
- Reset Vigor Router To Factory Default Settings
- SSL VPN from Windows to Vigor Router
- WireGuard VPN from Windows to Vigor Router
- EasyVPN
- OpenVPN to Vigor Router by using the self-generated certificate
- Local Network Setup and Management