Discovery
Automatically discover all VigorAPs/VigorSwitches on your LAN and manage up to 100 devices.
Provisioning
Setup the wireless in minutes by pushing configuration a selected APs or all the AP on the network; setup the VLAN or PoE for selected Switches.
Monitoring
Get notified when an AP/Switch lost connection or check if there's rogue AP nearby.
Visibility
Get network insights about AP/Switch, client, and CPU usage over a specified period.
Scheduled Maintenance
Schedule an off-hour firmware upgrade or configure backup/restore.
Mesh in the Network
Easy Installation
No need to configure APs located everywhere in your environment in person. You can set up several Mesh groups in your seat, and kill the Wi-Fi dead zone in your environment in minutes.
Central Management
Grouping several Mesh groups allows the network admin to monitor all the Mesh Roots/Nodes, and clients from a single plane. In addition, every Mesh Root/Node has its own dashboard, which displays device insights about alert, client, and CPU usage over a specified period.
Synced Settings
The Mesh group shares the same WLAN configuration. You may easily create several Mesh groups with same configuration, and automatically build a roaming environment.
Wireless Wizard
A 4-step wizard helps you finish all the configurations from registering the AP to VigorConnect through setting up the wireless.
AP Profile
The AP profile covers every setting of an VigorAP. It is recommended to group the APs with same characteristics together, and set up a profile, then provision to a network of APs.
Floor Plan
Built-in floor plan helps to plan the AP deployment to get a better signal coverage.
Rogue AP Detection
Detecting the unknown APs around your network.
Getting Confused with VLAN Setup?
Besides maintaining the same VLAN setting flow as the VigorSwitch WUI, VigorConnect provides an easier graphic way to set up VLAN for entry-level users.
PoE Scheduling
It is available to remotely turn on/off the PoE devices behind several switches at a time with PoE schedule.
System Requirement
Server
Operating System: Windows 7 or later, Linux, Raspberry Pi 3 B+ or later, Synology NAS(x86 system)
CPU: 1.2GHz Quad Core 64 bits
Memory: 2 GB RAM, Storage: 1 GB
Client
Browser: Firefox, Chrome, Opera, Safari, IE, Edge
Compatible Devices
VigorAP 1000C (f/w 1.3.2 or later)
VigorAP 1060C (f/w 1.4.0 or later)
VigorAP 802 (f/w 1.3.1.1 or later)
VigorAP 810 (f/w 1.2.3 or later)
VigorAP 903 (f/w 1.2.3 or later)
VigorAP 912C (f/w 1.3.2 or later)
VigorAP 918R Series (f/w 1.3.2 or later)
VigorAP 920R Series (f/w 1.2.3 or later)
VigorAP 960C (f/w 1.3.8 or later)
Phased-out Models :
VigorAP 810
VigorSwitch G1080 (f/w 1.05.0 or later)
VigorSwitch G1085 (f/w 2.5.1 or later)
VigorSwitch P1282 (f/w 2.7.0 or later)
VigorSwitch G1282 (f/w 2.6.9 or later)
VigorSwitch P2100 (f/w 2.6.5 or later)
VigorSwitch G2100 (f/w 2.6.5 or later)
VigorSwitch FX2120 (f/w 3.7.0 or later)
VigorSwitch G2121 (f/w 2.5.1 or later)
VigorSwitch Q2121x (f/w 2.8.1 or later)
VigorSwitch PQ2200xb (f/w 2.7.1 or later)
VigorSwitch Q2200x (f/w 2.7.1 or later)
VigorSwitch P2280x (f/w 2.5.1 or later)
VigorSwitch G2280x (f/w 2.5.1 or later)
VigorSwitch P2540xs (f/w 2.6.3 or later)
VigorSwitch G2540xs (f/w 2.6.3 or later)
Phased-out Models :
VigorSwitch P1280
VigorSwitch G1280
*For the phased-out models : As the software and hardware have stopped updating, the product is not guaranteed to operate normally.
