Vigor DSL Routers support PPPoE Pass-through on the DSL WAN interface so that the device on router's LAN can be the PPPoE client and establish the PPPoE connection directly. This article demonstrates how to configure PPPoE Pass-through on Vigor Router so that the clients behind the router can have PPPoE dial-up connections.
Go to WAN >> Internet Access, at PPPoE Pass-through filed, check "For Wired LAN" and/or "For Wireless LAN".
If the ISP requires tagged PPPoE, we can insert VLAN tag on Vigor Router's WAN interface. To do this, go to WAN >> General Setup >> WAN 1, enable VLAN Tag insertion and enter tag value as the ISP required.
Was this helpful?
Thank you for your feedback
Sorry about that. Leave us some comments below to help us improve, or Contact Support if you need need further assistance.