Knowledge Base
42 Results found for "ssl vpn"
21. SSL VPN between DrayOS Router and Vigor3900/2960
This article demonstrates LAN to LAN SSL VPN between a DrayOS Router (Vigor router) and a Vigor3900/2960 by the following topology. DrayOS Router and Vigor3900/2960 can both be the VPN server and client...
22. How to block an unknown IP address which keeps dialing VPN to Vigor Router?
...Click OK to save. Go to Objects Setting >> Service Type Object to create a profile.Here we take SSL VPN for example. Give a profile name. Choose the protocol this service uses. Enter the port this service...
23. How to use Central VPN Management (CVM)
To make CVM work, it requires configurations on both Central Router (VPN server) and the branch routers (VPN Clients). For DrayOS router, a central router can manage up to 8 branch routers. Central Router...
24. Solve the Can't find VPPP adapter Error of Smart VPN Client
...DrayTek Smart VPN Client software for windows requires DrayTek Virtual PPP adapter to provide the SSL VPN service. The driver should be installed during Smart VPN Client software installation; however...
25. Assign a fixed IP address for the remote VPN peer router
Go to VPN and Remote Access >> LAN to LAN, select the profile of the VPN tunnel you would like to configure. Enter the IP address for the remote router at Remote Gateway IP.
26. SSL VPN between two DrayTek Routers
This document introduces how to establish an SSL VPN tunnel between two Vigor Routers. (For SSL VPN tunnel between Vigor Router and Vigor3900, please refer to the article here.)
27. Single-Arm VPN Configuration
Single-Arm VPN allows the router's VPN to work only on the WAN interface, instead of working on traffic sent between LAN and WAN. When doing single-arm VPN, traffic arrives on the WAN interface, gets...
28. How to fix the connection not private error when using HTTPS Captive Portal for Hotspot
...certificate provider. Then, go to Certificate Management >> Local Certificate to upload them. In SSL VPN >> General Setup, select the Server Certificate that you uploaded in step a. After the trusted...
29. Use Port Redirection to access a LAN server from the Internet
...The commonly used ports in Vigor router are TCP 80 (for web server), TCP 443 (for web server and SSL VPN), and TCP 21 (for FTP). To avoid port conflicts, please change the ports in Management page...
30. Use Open Port to access a LAN server from the Internet
...The commonly used ports in Vigor router are TCP 80 (for web server), TCP 443 (for web server and SSL VPN), and TCP 21 (for FTP). To avoid port conflicts, please change the ports in Management page...