When LAN-to-LAN VPN established, Vigor Router will dynamically assign an IP address from its LAN DHCP IP pool to the remote router. If needed, for PPTP VPN and SSL VPN we can configure the router to assign a fixed IP address for the remote router. Configurations below show how to allocate a fixed IP address to a remote router of LAN-to-LAN VPN connection.
Go to VPN and Remote Access >> LAN to LAN, select the profile of the VPN tunnel you would like to configure. Enter the IP address for the remote router at Remote Gateway IP.
Go to User Management >> User Profile, enter the IP address you would like to assign for the remote router as the Static IP Address.
Published On: Dec 26, 2018
Was this helpful?
Thank you for your feedback :)
Sorry about that. Contact Support if you need further assistance, or leave us some comments below to help us improve.