Vigor2927 Series is a dual-Ethernet WAN firewall router, providing load-balancing and failover for your business continuity. Featuring VPN, QoS, route policy, firewall, content filtering, bandwidth management, captive hotspot portal, and a lot more, this is the ultimate router that does it all for SMB. The Series includes built-in 802.11ac Wave 2 WiFi, 802.11ax WiFi, and VoIP gateway models.
IPsec VPN throughput up to 290 Mbps
Throughput up to 120 Mbps
Recommended for a network of 50 hosts
Delivers link rate up to 3 Gbps
1Wireless Antenna (ac/ax model)
2Reset Button
3WLAN/WPS Button (ac/ax model)
4LED Indicator
52x USB 2.0
6Fixed WAN Port: 1x GbE RJ-45
7WAN/LAN Switchable Port: 1x GbE RJ-45
8Fixed LAN Port: 5x GbE RJ-45
92x FXS for VoIP (V model)
10Power On/Off Switch
11Power Input
Maximize throughput and reliability by using multiple Internet connections. Learn more
Build a secure and private tunnel from the LAN of Vigor2927 Series to the remote offices and teleworkers over the Internet. Learn more
The VPN works through firewalls providing secure remote access to any network environment. Learn more
Helps routers behind NAT to find each other and establish a LAN-to-LAN VPN. Learn more
Filter web pages by URL keyword or web category to block access to insecure or inappropriate contents.
Vigor2927 Series can do port forwarding and reserve bandwidth for VoIP traffic automatically, making VoIP setup effortless. Setup Guide
Prevent one device using all the bandwidth by bandwidth limit policy, session limit policy, and QoS settings.
Market your business and communicate with the guests while offering hospitality WLAN. Learn more
Get Internet access wirelessly from a wireless network, a mobile hotspot, or a personal hotspot set up on smartphones. Learn more
The free DDNS service for you to access the router by a fixed hostname of your choice. Learn more
Use the Vigor2927 Series router as a wireless controller to maintain and monitor the VigorAPs. Learn more
Easily link to other VigorAP to expand the wireless network. Learn more
Set up VLAN easily from the router and get a centralized hierarchy view of the switches. Learn more
Without sacrificing traffic control features, such as QoS, Bandwidth Limit, WAN Budget, Traffic Graph, Data Flow Monitor, the accelerator brings great performance.
With Hardware accelerator, Vigor2927 is fully capable of providing connections via 2 high speed WANs simultaneously. The accelerator supports up to 8k NAT and routing connections, providing firewall performance up to 940Mbps on single WAN and 1.8Gbps combine d performance across both WAN, while still meeting high expectation of QoS quality.
The accelerator includes Hardware QoS to meet high expectation of QoS quality while enjoying high firewall performance. You may easily prioritized business critical apps, and always keep VoIP in 1 st priority.
Although Vigor2927 already has improved IPSec performance from the previous Vigor2926 series, with Hardware IPSec enabled, IPSec performance is further improved to 800 Mbps. The acceleration capacity is 16 IPSec tunnels max. First 16 tunnels are accelerated automatically on a first come first serve basis. If any of the accelerating 16 tunnels disconnected, new tunnel will be put into the accelerator automatically to top off 16 accelerated tunnels.
*Since firmware v4.2.2
VoIP is always with top priority! With default UDP 5060 port (configurable), VoIP QoS is out-of-box ready.
Select your business critical apps, and easily put them into QoS classes.
Bandwidth will be reserved for high-priority classes, and can be used by low-priority classes when available.
OFDMA has been used in LTE for many years, and is now available in 802.11ax for multi-user mode.
Traditionally with OFDM, each frame is transmitted across the entire channel width. With low-rate transmission still using the whole channel, it brings latency and jitter to others and lower the overall efficiency.
OFDMA splits a single transmission into groups of subcarriers, and each subcarrier can be used by different client. With multiple clients transmitting simultaneously in the same channel, it improves efficiency of every single transmission opportunity and thus increases the wireless experiences in high density environment.
Discovery, Provisioning, Monitoring, Centralized Hierarchy View
Auto-Discovery, Provisioning, Monitoring, Centralized Hierarchy View, Reboot PoE Devices Remotely, Quick VLAN Configuration
Auto-Discovery, Provisioning, Monitoring, Centralized View, Alarm, Reboot VigorAP Remotely, Wi-Fi Client Load Balancing
Model | WAN Port | 2.4GHz WLAN | 5GHz WLAN | Wireless Antenna | Wireless Mode | Max. Link Rate | Max. Bandwidth | Wireless WAN | WDS | Mesh | VoIP Gateway | FXS RJ-11 |
Vigor2927 | GbE, RJ-45 | - | - | - | - | - | - | - | - | - | - | - |
Vigor2927ax | GbE, RJ-45 | 2x Dual-Band (3dBi for 5GHz, 2.5dBi for 2.4GHz) |
2.4 GHz: 802.11b/g/n/ax 5 GHz: 802.11 a/n/ac/ax |
2.4 GHz: 574 Mbps 5 GHz: 2.4 Gbps |
160 MHz | - | 5GHz Only |
5GHz Only |
- | - | ||
Vigor2927ac | GbE, RJ-45 | 2x Dual-Band (3dBi for 5GHz, 2.5dBi for 2.4GHz) |
2.4 GHz: 802.11b/g/n 5 GHz: 802.11 a/n/ac |
2.4 GHz: 400 Mbps 5 GHz: 867 Mbps |
80 MHz | 5GHz Only |
5GHz Only |
- | - | |||
Vigor2927Vac | GbE, RJ-45 | 2x Dual-Band (3dBi for 5GHz, 2.5dBi for 2.4GHz) |
2.4 GHz: 802.11b/g/n 5 GHz: 802.11 a/n/ac |
2.4 GHz: 400 Mbps 5 GHz: 867 Mbps |
80 MHz | 5GHz Only |
5GHz Only |
2 | ||||
Vigor2927F | 100/1000M Fiber SFP | 2x Dual-Band (3dBi for 5GHz, 2.5dBi for 2.4GHz) |
2.4 GHz: 802.11b/g/n 5 GHz: 802.11 a/n/ac |
2.4 GHz: 400 Mbps 5 GHz: 867 Mbps |
80 MHz | - | 5GHz Only |
5GHz Only |
- | - |