DrayTek VigorSwitch P2100 is a compact Layer 2+ Managed Gigabit PoE switch well-suited for smart home and branch/remote sites. It has 2x GbE SFP ports, 8x Gigabit Ethernet PoE/PoE+ ports with power budget of 140 watts, and 1x console port. Featuring Layer 3 features, including DHCP Server and VLAN Routing, VigorSwitch P2100 improves local network sustainability and efficiency regardless of the gateway. Furthermore with IP Conflict Detection & Prevention, ONVIF Surveillance, ping watchdog and a lot more, this is the balanced switch that brings advanced features into small environments.
PoE/PoE+ Gigabit Ethernet Ports
Gigabit SFP slot
PoE Power Budget
38x PoE/PoE+ Gigabit Ethernet
52x SFP Port
Deliver power and data over one ethernet cable, turn on/off the PoE device periodically with PoE Schedule.
Enable Ping check to selected devices to keep monitoring on their status. If ping timeout, power cycle (if PoE enabled) the port and/or send out mail alert.
Recognize traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritization.
Recognize the ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance. Learn more
Improve overall network performance by using VigorSwitch P2100 to route the inter-VLAN traffic directly and offload the router.
Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host. Learn more
VigorSwitch P2100 supports ACL by IP/MAC and 802.1x port access control with RADIUS to filter unauthorized hosts.
Improve the performance of critical traffic by prioritizing the traffic with CoS, DSCP, and IP Precedence tag.
VigorSwitch P2100 supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.
Easily manage and monitor the network through the web-based console with graphics showing ports and hardware status. See demo
Multiple Admin accounts with two levels of administrator privilege.
Set up VLAN easily from the router and get a centralized hierarchy view of the switches. Learn more
Compliant with IEEE 802.3az to reduce power consumption.
Recognize the ONVIF devices in different VLANs, display surveillance topology, provide UI for video streaming and device maintenance.
VigorSwitch automatically detects ONVIF devices, and displays the topology of connecting IP cameras and NVRs.
Images filmed by IP cameras can be viewed directly on VigorSwitch.
Support ONVIF devices basic configuration/maintenance remotely via VigorSwitch. Such as remote reboot, factory reset, network settings, etc.
Locating Not-Responding Cameras Made Easy
It’s already difficult to manage several IP cameras across different locations and customers, not to mention to keep monitoring on which camera stops functioning.
To help on this task, VigorSwitch keeps pinging on the ONVIF IP cameras and taking snapshots from them periodically, and sends out an email alert with the latest snapshot when a camera not responding.
With PoE models, VigorSwitch can also provide first aid to automatically power cycle the particular port to reboot the camera.
Keep an eye on the environment and notify the administrator of any IP conflicts.
For a more stable network, VigorSwitch can’t only detect but block the misconfigured or malicious IP host.
An all-in-one management platform for Vigor devices on the LAN side.
All you need is connect the Vigor Switch/AP to the LAN side of the router, Vigor Router will then discover the devices to be managed.
Switch profile, including VLAN, enabled/disabled port, and rate limit, may be set on the Vigor Router and provisioned to the VigorSwitch.
Vigor Router provides a centralized hierarchical view of managing devices. Once there’s alert happens, you may also check the log and receive the notification.
You may perform a factory reset, save/restore a configuration backup, or trigger a remote reboot directly on the Vigor Router. There’s no need to log in to each device’s management page.
|LAN Port||8x 10/100/1000Mbps Ethernet, RJ-45
2x 1000Mbps SFP slot
|Console Port||1x RJ-45|
|Button||1x RST Button|
|PoE Capable Ports||8|
|PoE Standards||PoE/PoE+(802.3af/802.3at), Type mode A|
|PoE Power Budget||140 watts|
|Power Cycle on Port||Manual, Ping Watchdog|
|Buffer Size||4.1 Mbit|
|Switching Capacity||20 Gbps|
|Forwarding Rate||14.88 Mpps (64 bytes)|
|MAC Address Table||8k|
|Jumbo Frame||Up to 9 KB|
|L3 Routing Table||1.5k (prefix route, static route, and ACL shared)|
|IP Version||IPv4, IPv6|
|Ethernet Standards||802.3af PoE
802.3x Flow Control
802.1q Tag-based VLAN
802.1p Class of Service
802.1x Port Access Control
|Max.Number of VLAN||256|
|VLAN Type||802.1q Tag-based|
|802.1x Guest VLAN|
|Real-Time Video Streaming|
|ONVIF Device Maintenance||Device Info, Reset Factory Default, Time Settings, Reboot|
|Number of QoS Queues||8|
|Queue Scheduling||SPQ, WRR|
|CoS (Class of Service)||802.1p CoS, DSCP, CoS-DSCP, IP Precedence|
|Rate Limit & Shaping|
|Access Control List||MAC, IPv4, IPv6|
|Storm Control||Broadcast, Unknown Multicast, Unknown Unicast|
|802.1x Port Access Control|
|IP Source Guard|
|IP Conflict Detection|
|IP Conflict Prevention|
|Dynamic ARP Inspection|
|DHCP Snooping with Option 82|
|Max. Number of Group||4|
|Max. Number of Member in Each Group||8|
|Traffic Load Balancing||MAC Address, IP/MAC Address|
|IGMP Snooping||v2, v3 (BISS)|
|MLD Snooping||v1, v2 (Basic)|
|Max. Number of Multicast Group||256|
|MVR (Multicast VLAN Registration)|
Layer 3 Features
|DHCP Server||(Since firmware v2.6.8)|
|Authentication Server||RADIUS, TACACS+|
|RADIUS Attribute Assignment||User Privilege, VLAN|
|Web Interface||HTTP, HTTPS|
|Command Line Interface||Telnet, SSH v2|
|OpenVPN Client||Certificate-based authentication|
|User Authentication||Local Database, RADIUS, TACACS+|
|SNMP||v1, v2c, v3|
|RMON Group||1, 2, 3, 9|
|LLDP||LLDP-MED, Media Endpoint Discovery Extension|
|Mail Alert||Port Status, Port Speed, System Restart, IP Conflict, Harware Monitor, Device Check, ONVIF Throughput Threshold|
|2-Level Admin Privilege|
|Multiple Admin Accounts|
|Managed by VigorRouter SWM|
|Managed by VigorConnect|
|Managed by VigorACS 2|
|Config File Export/Import|
|SNTP (Simple Network Time Protocol)|
|Diagnostics Tools||Port Mirroring, Ping, Cable Test|
|19-inch Rack Mountable||Mouting Kit Included|
|Power Input||AC 100-240V @ 2.6A|
|Max. Power Consumption||164.3 watts|
|Dimension (mm)||319(W) x 208(D) x 45(H)|
|Weight||2.61 kg (5 lb)|
|Operating Temperature||0 to 50°C|
|Storage Temperature||-20 to 70°C|
|Operating Humidity||10 to 90% non-condensing|
|Storage Humidity||5 to 90% non-condensing|