DrayTek VigorSwitch P1282 is a Web Smart Gigabit PoE switch. It has 24x GbE PoE/PoE+ ports with 400 watts of power budget and 4x GbE/SFP combo ports.
Equipped with enterprise-level features, including IP Conflict Detection & Prevention, ONVIF Surveillance, and ping watchdog, VigorSwitch P1282 is a managed switch that brings network security and stability into mid-sized environments.
PoE/PoE+ Gigabit Ethernet, RJ-45
Gigabit Ethernet, RJ-45/SFP Combo
of PoE Power Budget
424x PoE/PoE+ Gigabit Ethernet
54x Gigabit Ethernet/SFP Combo
Deliver power and data over one ethernet cable, turn on/off the PoE device periodically with PoE Schedule.
Enable Ping check to selected devices to keep monitoring on their status. If ping timeout, power cycle (if PoE enabled) the port and/or send out mail alert.
Recognize traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritization.
Improve the performance of critical traffic by prioritizing the traffic with CoS, DSCP, and IP Precedence tag.
Recognize the ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance. Learn more
Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host. Learn more
Easily manage and monitor the network through the web-based console with graphics showing ports and hardware status. See demo
Multiple Admin accounts with two levels of administrator privilege.
Set up VLAN easily from the router and get a centralized hierarchy view of the switches. Learn more
Compliant with IEEE 802.3az to reduce power consumption.
Recognize the ONVIF devices in different VLANs, display surveillance topology, provide UI for video streaming and device maintenance.
VigorSwitch automatically detects ONVIF devices, and displays the topology of connecting IP cameras and NVRs.
Images filmed by IP cameras can be viewed directly on VigorSwitch.
Support ONVIF devices basic configuration/maintenance remotely via VigorSwitch. Such as remote reboot, factory reset, network settings, etc.
Locating Not-Responding Cameras Made Easy
It’s already difficult to manage several IP cameras across different locations and customers, not to mention to keep monitoring on which camera stops functioning.
To help on this task, VigorSwitch keeps pinging on the ONVIF IP cameras and taking snapshots from them periodically, and sends out an email alert with the latest snapshot when a camera not responding.
With PoE models, VigorSwitch can also provide first aid to automatically power cycle the particular port to reboot the camera.
keeps an eye on the environment and notify the administrator of any IP conflicts.
For a more stable network, VigorSwitch can’t only detect but block the misconfigured or malicious IP host.
VigorSwitch keeps pinging on the LAN devices. Once the device stop responding to the ping, PoE cycle a port or send email alert.
DrayTek provides an all-in-one management platform for Vigor devices on the LAN side.
All you need is connect the VigorSwitch to the LAN side of the router, Vigor Router will then discover the devices to be managed.
Switch profile may be set on the Vigor Router. VLAN and scheduled ports control may be set and provision to the VigorSwitch remotely.
VigorRouter provides a hierarchical centralized view of managing devices, you may always check if the managed VigorSwitch is online and if there's log and alert happens.
You may perform a factory reset, save/restore a configuration backup, or trigger a remote reboot directly on the VigorRouter. There's no need to log in to each device's management page.
|LAN Port||24x 10/100/1000 Mbps Gigabit Ethernet, RJ-45
4x Gigabit Ethernet/SFP Combo
|Button||1x RST Button|
|PoE Capable Ports||24|
|PoE Standards||PoE/PoE+(802.3af/802.3at), Type mode A|
|PoE Power Budget||400 watts|
|Power Cycle on Port||Manual, Ping Watchdog|
|Buffer Size||4.2 Mbit|
|Switching Capacity||56 Gbps|
|Forwarding Rate||41.7 Mpps (64 bytes)|
|MAC Address Table||8K|
|Jumbo Frame||Up to 9KB|
|IP Version||IPv4, IPv6|
|Ethernet Standards||802.3af PoE|
802.1q Tag-based VLAN
802.3x Flow Control
802.1p Class of Service
|Max.Number of VLAN||256|
|VLAN Type||802.1q Tag-based|
|Real-Time Video Streaming|
|ONVIF Device Maintenance||Device Info, Reset Factory Default, Time Settings, Reboot|
|Number of QoS Queues||8|
|Queue Scheduling||SPQ, WRR|
|CoS (Class of Service)||802.1p CoS, DSCP, CoS-DSCP, IP Precedence|
|Access Control List||MAC, IPv4, IPv6|
|Storm Control||Broadcast, Unknown Multicast, Unknown Unicast|
|IP Source Guard|
|IP Conflict Detection|
|IP Conflict Prevention|
|Max. Number of Group||8|
|Max. Number of Member in Each Group||8|
|Traffic Load Balancing||MAC Address, IP/MAC Address|
|IGMP Snooping||v2, v3 (BISS)|
|Web Interface||HTTP, HTTPS|
|Command Line Interface||Telnet, SSH v2|
|OpenVPN Client||Certificate-based authentication|
|SNMP||v1, v2c, v3|
|Mail Alert||Port Status, Port Speed, System Restart, IP Conflict|
|2-Level Admin Privilege|
|Multiple Admin Accounts|
|Managed by VigorRouter SWM|
|Managed by VigorConnect|
|Managed by VigorACS|
|Config File Export/Import|
|SNTP (Simple Network Time Protocol)|
|Diagnostics Tools||Port Mirroring, Ping, Cable Test|
|19-inch Rack Mountable||Mouting Kit Included|
|Power Input||AC 100-240V @ 6.5A|
|Max. Power Consumption||460.3 watts|
|Dimension||440mm x 281.30mm x 44mm|
|Weight||4.3 kg (9.6 lb)|
|Operating Temperature||0 to 50°C|
|Storage Temperature||-20 to 70°C|
|Operating Humidity||10 to 90% non-condensing|
|Storage Humidity||5 to 90% non-condensing|