Customize the Caller ID Type

Vigor Router supports Bellcore FSK, ETSI FSK, and DTMF, and also provides more options based on each country's specifications. Usually, the router's default caller ID type is the one compliant with the local caller ID standard. However, if the caller ID doesn't show correctly, you may try other caller ID settings. To change the caller ID setting, go to VoIP >> Phone setting >> Index 1/2, click on Advanced.

You may try another Region or use User Defined, then select a Caller ID Type manually.

However, since the standards used for caller ID varies from country to country, in some area, Vigor Router might still not be able to show the correct information. If the problem persists, don't hesitate to contact our technical support, we will keep collecting data and improving the feature.

Published On:2016-02-26 

Was this helpful?   

Sorry about that. Contact Support if you need further assistance, or leave us some comments below to help us improve.