VigorLTE 200n is an LTE broadband Wi-Fi router for smart home or small business network of around 30 hosts. The primary WAN interface is the LTE mobile broadband, ideal for sites without fixed lines infrastructure or locations that need temporary Internet access. Alternatively, one of its 2x Gigabit Ethernet LAN ports can be switched to WAN interface and get internet access from a fixed-line broadband connection.
VigorLTE 200n has two Ethernet ports and built-in 802.11n Wi-Fi for LAN access. The router can handle two concurrent VPN tunnels to link to the main offices or provides remote management access for Network Admins. It also offers the flexibility for network management, including Port Forwarding, SPI Firewall, Content Filtering, Bandwidth Management, QoS, and more.
150 Mbps
Maximum LTE Download Speed
2 VPN
IPsec Throughput up to 50 Mbps
Dual-SIM
Insert 2x SIM cards for Failover
30k Sessions
Recommend for a metwork of 30 hosts
1WLAN/WPS Button
2Reset Button
3SIM Slot Security Cover
42x Standard-Sized SIM Slot
5LAN/WAN Switchable GbE, RJ-45
6LAN GbE, RJ-45
7Power On/Off Switch
8Power Input
9LTE Antenna
Key Features
Embedded SIM Slot
Provide 4G/LTE Internet access to where fixed lines are (temporarily) not available without the need for a USB dongle.
VPN (Virtual Private Network)
Build a secure and private tunnel from the LAN of VigorLTE 200n to the remote offices and teleworkers over the Internet. Learn more
VPN Matcher
Helps routers behind NAT to find each other and establish a LAN-to-LAN VPN. Learn more
Bandwidth Management
Prevent one device using all the bandwidth by bandwidth limit policy, session limit policy, and QoS settings.
Firewall & Content Filter
Filter web pages by URL keyword or web category to block access to insecure or inappropriate contents.
DrayDDNS
The free DDNS service for you to access the router by a fixed hostname of your choice. Learn more
Central AP Management
Use the VigorLTE 200n router as a wireless controller to maintain and monitor the VigorAPs. Learn more
Note :The stated throughput performance figures are the maximum derived from DrayTek internal testing, conducted under optimal conditions, with Hardware Acceleration enabled where available. The actual performance may vary based on network conditions and activated applications.
Model
Performance
NAT Session
Max. NAT (Mbps)
Max. NAT with Hardware Acceleration (Mbps)
Max. NAT with Hardware Acceleration : Single WAN (Mbps)
Max. NAT with Hardware Acceleration : Dual WAN (Mbps)
Max. NAT with Software Acceleration (single-directional) (Mbps)
Max. NAT with Software Acceleration (bi-directional) (Mbps)
",
"Config Backup/Restore":"T",
"Config File Compatibility":"-",
"Firmware Upgrade":"TFTP, HTTP, TR-069",
"2-Level Administration Privilege":"F",
"Access Control":"Access List, Brute Force Protection",
"Notification Alert":"SMS, E-mail",
"Netflow":"",
"SNMP":"v1, v2c, v3",
"Syslog":"T",
"Broadcast DSL Info to LAN":"F",
"VPN Managment":"0",
"AP Managment (APM)":"2",
"Mesh (Number of manageable APs)":"-",
"Switch Management (SWM)":"0",
"VigorACS Management (Since f/w)":"V3.8.14",
"Power Input":"DC 12V @ 1A",
"Max. Power Consumption (watts)":"12",
"Dimension (mm)":"207 x 131 x 42",
"Weight (g)":"380",
"Operating Temperature":"0 to 45°C",
"Storage Temperature":"-25 to 70°C",
"Operating Humidity (non-condensing)":"10 to 90%"
}
Note :The stated throughput performance figures are the maximum derived from DrayTek internal testing, conducted under optimal conditions, with Hardware Acceleration enabled where available. The actual performance may vary based on network conditions and activated applications.
LTE Antenna
RJ-45 Cable (Ethernet)
Power Adapter
Quick Start Guide
