Knowledge Base

52 Results found for "vigoracs"

Result pages:1 / 2 / 3 / 4 / 5 / 6

11. Install VigorACS 3 on Linux

This document demonstrates how to install VigorACS 3 on Linux platform. Before you install, please note that: Make sure you have the 64-bit operating system, VigorACS 3 can only run on the 64-bit platform...

12. Install VigorACS 3 on Windows

This document demonstrates how to install VigorACS 3 on Windows. Before you install, please note that: Make sure you have the 64-bit operating system, VigorACS 3 can only run on the 64-bits platform...

13. Check Clients of Certain Period by VigorACS

VigorACS provides Clients under the Monitoring menu. This page records the information of all the clients connecting to the Vigor Router or VigorAP managed by VigorACS. The network administrator can look...

14. Plan Wireless Coverage with VigorACS 2

...Here is a feature may suit your need: the Floor Plan. The Floor Plan, one of the helpful tools on VigorACS 2, is the feature that network administrator can use to preview the deployment of VigorAPs...

15. Activate/Renew License Key and Add Extension Key for VigorACS

...will also need to register the device to your MyVigor account and activate a license key to use the VigorACS service. The license can be purchased from your local distributor, and we provide a 1-month...

16. Show Router Name in the Device List of VigorACS

While CPE joins to the VigorACS at the first time, VigorACS will assign a name to CPE by the default naming rule: model name + MAC address. However, if you have already set up the router name (or device...

17. Restore SQL File to VigorACS 2 Database

This document demonstrates how to restore the backup SQL file to the database of VigorACS 2 on Windows platform and Linux platform. Since the column and tables might be different for each version...

18. Schedule CPE to reboot periodically via VigorACS 2

This article is going to demonstrate how to configure schedule CPE to reboot on VigorACS 2. Configure the Reboot Profile 1. Go System Menu > Maintenance > Device Reboot, switch to Reboot Settings...

19. File Manager of VigorACS

EMS folder is a mirror of the NetDocument on the VigorACS. You can put a file into the corresponding folder, and it will appear on the webpage of VigorACS. It also includes the mapping of the Maintenance...

20. Change the Location of CPE or Network on VigorACS

From the Network Dashboard of VigorACS page, we could see where all the CPEs located. The default location setting is Taiwan. To change the location of a CPE or a network, go to the Network Management...

Result pages:1 / 2 / 3 / 4 / 5 / 6