Knowledge Base

16 Results found for "routing route policy"

Result pages:1 / 2

1. Change the default route by Route Policy

1. Go to Routing >> Load-Balance/Route Policy, enable Advance Mode. Click Index 1 to create a new policy for the Vigor Router. 2. To specify WAN interface for traffic, we need to: Enable this profile...

2. Introduction to Route Policy

This document introduces the Route Policy (a.k.a., routing policy, or policy-based routing). This feature allows the network administrator to manage the outbound route base on the IP address, port number...

3. Forward traffic to other Internet Gateway Router

Go to Routing > Load-Balance/Route Policy, click an index number to create a new policy. Configure the policy as follows: Enable this policy. Enter Source IP as the IP address of the branch office...

4. Address Mapping by Route Policy

1. To add more IP addresss for the WAN interface, go to WAN >> Internet Access >> WAN >> Details Page. 2. For address mapping, go to Routing > Load Balance/Route Policy: create...

5. Use Country Object in Route Policy

Vigor routers can forward the traffic through multiple outgoing interfaces, such as WAN, VPN, and LAN. Network Administrator can create the Route Policy or Static Route to regulate the forwarding interface...

6. Designate a outgoing WAN for traffic to a certain Website

1. Go to Routing >> Load-Balance/ Route Policy, click on an available index number. 2. Enable this profile, and enter a comment. For Destination in the Criteria field, choose "Domain Name" and enter...

7. IKEv2 EAP between NordVPN and Vigor Router

1. You will need a NordVPN account and download the NordVPN root CA certificate from https://downloads.nordvpn.com/certificates/root.der And copy Service Credentials in NordVPN. 2. Get the NordVPN server...

8. Designate a Outgoing WAN for SIP Traffic

If there are multiple WAN interfaces, the router will balance the traffic among all the active WANs. However, we can designate a path for certain traffic by the feature Route Policy. For example, suppose...

9. Make specific host use VPN tunnel as the default gateway 

Assuming Vigor3900 is in the Head Office and Vigor2960 is in the Branch Office, network Administrator created a VPN between the two offices and wants to make specific PC behind Vigor2960 to send all traffics...

10. Troubleshoot VPN is up but no traffic

When the VPN shows online, but you cannot access the host on the remote network, here's are some troubleshooting tips. 1. If the remote PC allows ping? First, ping requests might be blocked by the PC's...

Result pages:1 / 2