Knowledge Base

20 Results found for "IPsec General Setup Pre-Shared Key"

Result pages:1 / 2

1. IPsec Tunnel Main Mode between DrayTek Routers (Client with Dynamic IP)

VPN Server Setup 1. Go to VPN and Remote Access >>IPsec General Setup page and configure the General IPsec Pre-Shared Key. The Pre-Shared Key configured here will be used for authenticating all IPsec...

2. L2TP over IPsec from Windows 7 to Vigor Router

This document introduces how to create a Host-to-LAN VPN from Windows 7 Built-In VPN Client to a Vigor Router. In this example, we use L2TP over IPsec VPN. There will be two parts of contents, set up...

3. L2TP over IPsec VPN from Ubuntu to Vigor Router

This article demonstrates how to set up Vigor Router as VPN server, especially for Ubuntu, and how to establish an L2TP over IPsec VPN from Ubuntu (16.04) to the private network of Vigor Router. It covers...

4. L2TP over IPsec VPN between DrayTek Routers

This note is going to demonstrate how to establish L2TP over IPsec between two Vigor Routers with the following topology. VPN Server Setup 1. Set up IPsec pre-shared key, go to VPN and...

5. IPsec VPN between Zyxel VMG and Vigor Router

This application note demonstrates how to establish IPsec VPN tunnel between Vigor router and Zyxel VMG router. Suppose the Vigor Router has LAN subnet on IP address 192.168.24.0/24, and Zyxel VMG is...

6. L2TP over IPsec VPN from macOS to Vigor Router

Connecting VPN from macOS 1. Go to System Preferences >> Network. 2. Click + to add a new network and edit the profile as follows: Select VPN for Interface Select "L2TP over IPSec" for VPN Type...

7. Troubleshoot VPN Not Connecting

Only Vigor-xxx ==>  but no Vigor-xxx <== It means the VPN peer does not get the VPN request at all. You should check the accessibility between the two VPN routers first by testing...

8. IKEv2 VPN between DrayTek Routers

VPN Server (Dial-In) Settings 1. Go to VPN and Remote Access >> IPsec General Setup, Input Pre-shared Key Confirm Pre-Shared Key Click OK 2. Go to VPN and Remote Access >> LAN to LAN and click...

9. Three-Sides Communication through VPN

It is common that a company has a headquarter and few branches locate at different places. The network administrator can establish a VPN tunnel between hear quarter and each branch, so the employees on...

10. IKEv2 VPN from iOS to Vigor Router

Connecting VPN from iOS 1. Go to Settings >> General >> VPN and tap Add VPN Configuration 2. Edit the configuration as follows: Select "IKEv2" for Type Type the WAN IP or hostname of the router...

Result pages:1 / 2