LTE Cat.6 and 11ac Wave 2 for Fast Internet Connectivity
Vigor2927 LTE Series is a dual-Ethernet WAN firewall router with embedded 4G/LTE connectivity. Embedded 2 SIM slots (1 SIM online at a time) and compliant with LTE Cat 6 to deliver the lightning speed of up to 300/50 Mbps
(DL/UL), providing load-balancing and failover for your business continuity. Featuring VPN, QoS, route policy, firewall, content filtering, bandwidth management, captive hotspot portal, and a lot more, this is the ultimate
router that does it all for SMB. The series includes built-in 802.11ac Wave 2 Wi-Fi models.
300 Mbps
Maximum LTE Download Speed
50 VPN
IPsec VPN throughput up to 250 Mbps
25 SSL VPN
Throughput up to 120 Mbps
60k Sessions
Recommended for a network of 50 hosts
1Wireless Antenna (ac model)
2Reset Button
3WLAN/WPS Button (ac model)
4LED Indicator
51x USB 2.0
6Fixed WAN Port: 1x GbE RJ-45
7WAN/LAN Switchable Port: 1x GbE RJ-45
8Fixed LAN Port: 5x GbE RJ-45
9LTE Antenna
10Power Input
11Power On/Off Switch
122x Standard-Sized SIM Slot
Key Features
Embedded SIM Slot
Provide 4G LTE/5G Internet access to where fixed lines are (temporarily) not available without the need for a USB dongle.
Load Balancing
Maximize throughput and reliability by using multiple Internet connections. Learn more
VPN (Virtual Private Network)
Build a secure and private tunnel from the LAN of Vigor2927 LTE Series to the remote offices and teleworkers over the Internet. Learn more
SSL VPN
The VPN works through firewalls providing secure remote access to any network environment. Learn more
VPN Matcher
Helps routers behind NAT to find each other and establish a LAN-to-LAN VPN. Learn more
Firewall & Content Filter
Filter web pages by URL keyword or web category to block access to insecure or inappropriate contents.
VoIP Friendly
Vigor2927 LTE Series can do port forwarding and reserve bandwidth for VoIP traffic automatically, making VoIP setup effortless. Setup Guide
Bandwidth Management
Prevent one device using all the bandwidth by bandwidth limit policy, session limit policy, and QoS settings.
Hotspot Web Portal
Market your business and communicate with the guests while offering hospitality WLAN.
Learn more
Wireless WAN (ac model only)
Get Internet access wirelessly from a wireless network, a mobile hotspot, or a personal hotspot set up on smartphones. Learn more
DrayDDNS
The free DDNS service for you to access the router by a fixed hostname of your choice. Learn more
Central AP Management
Use the Vigor2927 LTE Series router as a wireless controller to maintain and monitor the VigorAPs. Learn more
Mesh (Wireless model only)
Easily link to other VigorAP to expand the wireless network. Learn more
Central Switch Management
Set up VLAN easily from the router and get a centralized hierarchy view of the switches. Learn more
Hardware Acceleration
Without sacrificing traffic control features, such as QoS, Bandwidth Limit, WAN Budget, Traffic Graph, Data Flow Monitor, the accelerator brings great performance.
Hardware NAT & Routing
With Hardware accelerator, Vigor2927 LTE is fully capable of providing connections via 2 high speed WANs simultaneously. The accelerator supports up to 8k NAT and routing connections, providing firewall performance
up to 940Mbps on single WAN and 1.8Gbps combine d performance across both WAN, while still meeting high expectation of QoS quality.
Hardware QoS
The accelerator includes Hardware QoS to meet high expectation of QoS quality while enjoying high firewall performance. You may easily prioritized business critical apps, and always keep VoIP in 1 st priority.
Hardware IPSec
Although Vigor2927 LTE already has improved IPSec performance from the previous Vigor2926 LTE series, with Hardware IPSec enabled, IPSec performance is further improved to 800 Mbps. The acceleration capacity is 16
IPSec tunnels max. First 16 tunnels are accelerated automatically on a first come first serve basis. If any of the accelerating 16 tunnels disconnected, new tunnel will be put into the accelerator automatically to
top off 16 accelerated tunnels.
*Since firmware v4.2.2
APP QoS
VoIP First
VoIP is always with top priority! With default UDP 5060 port (configurable), VoIP QoS is out-of-box ready.
Improve Experience for Business-Critical Apps
Select your business critical apps, and easily put them into QoS classes.
Flexible Bandwidth Allocation
Bandwidth will be reserved for high-priority classes, and can be used by low-priority classes when available.
Note :The stated throughput performance figures are the maximum derived from DrayTek internal testing, conducted under optimal conditions, with Hardware Acceleration enabled where available. The actual performance may vary based on network conditions and activated applications.
Model
2.4GHz WLAN
5GHz WLAN
Wireless Antenna
Wireless Mode
Max. Link Rate
Max. Bandwidth
Wireless WAN
WDS
Mesh
Hardware Accelerationfor WLAN Client
Vigor2927L
-
-
-
-
-
-
-
-
-
-
Vigor2927Lac
2x Dual-Band (3dBi for 5GHz, 2.5dBi for 2.4GHz)
2.4 GHz: 802.11b/g/n 5 GHz: 802.11 a/n/ac
2.4 GHz: 400 Mbps 5 GHz: 867 Mbps
80 MHz
5GHz Only
5GHz Only
-
Model
Performance
NAT Session
Max. NAT (Mbps)
Max. NAT with Hardware Acceleration (Mbps)
Max. NAT with Hardware Acceleration : Single WAN (Mbps)
Max. NAT with Hardware Acceleration : Dual WAN (Mbps)
Max. NAT with Software Acceleration (single-directional) (Mbps)
Max. NAT with Software Acceleration (bi-directional) (Mbps)
",
"Config Backup/Restore":"T",
"Config File Compatibility":"Vigor2926 LTE",
"Firmware Upgrade":"TFTP, HTTP, TR-069",
"2-Level Administration Privilege":"T",
"Access Control":"Access List, Brute Force Protection",
"Notification Alert":"SMS, E-mail",
"Netflow":"v5, v9, IPFIX",
"SNMP":"v1, v2c, v3",
"Syslog":"T",
"Broadcast DSL Info to LAN":"F",
"VPN Managment":"8",
"AP Managment (APM)":"20",
"Mesh (Number of manageable APs)":"7",
"Switch Management (SWM)":"10",
"VigorACS Management (Since f/w)":"V4.2.0.1",
"Power Input":"DC 12V @ 2.5A",
"Max. Power Consumption (watts)":"27.6",
"Dimension (mm)":"241 x 165 x 44",
"Weight (g)":"",
"Operating Temperature":"0 to 45°C",
"Storage Temperature":"-25 to 70°C",
"Operating Humidity (non-condensing)":"10 to 90%"
}
Note :The stated throughput performance figures are the maximum derived from DrayTek internal testing, conducted under optimal conditions, with Hardware Acceleration enabled where available. The actual performance may vary based on network conditions and activated applications.
Antenna + Socket
Antenna x 2 
RJ-45 Cable (Ethernet)
Power Adapter
Quick Start Guide
