We have launched the new version of the DrayTek website, and this content is no longer being maintained.
You will find more information on our new site; however, we will keep this page for a few months.

How to use Call Barring?

Call Barring is a function to block certain types of incoming and outgoing phone calls. On VigorIPPBX or VoIP models, Administrator can set up call barring to based on a number or a domain, and the settings can be applied to a specific extension, group, or trunk.

To set up call barring on VigorIPPBX, go to IP PBX >> Dial Plan >> Call Barring and click an available index
(For Vigor VoIP models, Call Barring setup can be found at VoIP >> Dial Plan >> Call Barring)

  1. Enable the setting
  2. Select Call Direction which can be call-in, call-out and both
  3. Apply To specific extension or group is available when the call direction is Out
  4. Select a Barring Type
  5. Type the SIP URL (e.g., draytel.org) or the Number which is forbidden
  6. Select an Interface to apply this setting only to the calls going through the trunk selected

Block Anonymous number and Unknown Domains

Furthermore, VigorIPPBX is able to block incoming calls from anonymous caller ID or unknown domains. To active the feature, go to IP PBX >> Dial Plan >> Call Barring >> Block Anonymous and Block Unknown Domain, then enable it.

Was this article helpful?
1How to use Call Barring? has been viewed------ 1 ------times.