We have launched the new version of the DrayTek website, and this content is no longer being maintained.
You will find more information on our new site; however, we will keep this page for a few months.

VigorAP 902 blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg

VigorAP 902

11ac Dual-Band Wireless Access Point + 5-Port Gigabit Ethernet Switch
  • Concurrent Dual-band 802.11ac with 2x2 MIMO
  • Delivers data rate of up to 867 Mbps in the 5GHz band and 300 Mbps in the 2.4GHz band
  • 5 Gigabit Ethernet LAN ports including 1 PoE-capable port
  • 1 USB port for printer or USB thermometer
  • 2 LAN Subnet, up to 8 SSIDs with unique Subnet, VLAN, Access Control, Bandwidth Limit settings
  • Features AirTime Fairness and Band Steering for better Wi-Fi user experience
  • Built-in RADIUS server for 802.1x authentication
  • Improve roaming experience by Fast Roaming & AP-assisted Roaming
  • Provide multiple operating modes - AP, Bridge, WDS, and Universal Repeater
  • Support both stand-alone and controller-based setup


The VigorAP902 is an 11ac dual-band wireless access point with business-grade features provided, including Band Steering, AirTime Fairness, built-in RADIUS server, AP-assisted roaming and Mobile Device Management. It is not only a wireless access point but also a 5 Gigabit Ethernet LAN switch, and there is also a USB port for USB printer or a USB temperature sensor.

Concurrent Dual-Band

VigorAP902 runs on 5 GHz and 2.4 GHz frequency band simultaneously, allows more concurrent Wi-Fi clients, and benefits from the fast Wi-Fi speed of 5GHz and long-range Wi-Fi signal of 2.4GHz at the same time to meet the needs of various network applications. The support of Band Steering feature helps you to direct the 5G-compatible client devices to the less-crowded 5GHz Wi-Fi, thus improve the Wi-Fi experience for all the clients.

Multiple SSID & Built-in RADIUS Server

VigorAP 902 can be used to provide Wi-Fi service to staff and guest at the same time, up to 8 SSIDs can be configured on VigorAP 902, and each of the SSID can be mapped to a different VLAN and have a unique security settings.

VigorAP 902 is also an integrated solution for a business network which would like to do 802.1x authentication (instead of using a shared password, this requires a unique username and password for each user) but does not have an authentication server deployed yet. VigorAP 902 can do 802.x authentication based on the local user accounts, and also act as the RADIUS server for other devices  (e.g., a router) on the network.

draytek VigorAP 902 multi ssid


For a network where multiple access points are deployed, VigorAP 902 provides solutions to improve the Wi-Fi client’s roaming experience. While roaming is a choice of the client device, VigorAP 902 can help the client switching to another access point which offers better signal by the feature called “AP-Assisted Roaming”, custom conditions can be set including a stronger signal guaranteed. (Learn more about AP-Assisted Roaming by visiting our FAQ)

Acting as Wireless Bridge 

VigorAP 902 can also be used as a wireless bridge to connect to other VigorAP and deliver connectivity to wired devices through its 5 Gigabit Ethernet ports, thus to extend the local network to where physical lines are not available. Various operating modes are supported, VigorAP 902 can also be the wireless bridge and still accept wireless clients at the same time. Universal Repeater mode is also supported by VigorAP 902 for connecting to other brand's access point or Wi-Fi router to extend their wireless coverage.

VigorAP 902APM

Easy Setup & Monitoring

Vigor AP 902 supports both stand-alone setup and controller-based setup. For settings up a few access points only, the configuration can be done directly on the AP's intuitive web user interface. When it comes to managing a large amount of access point, there is the centralized management tool - VigorACS to perform configuration provisioning, bulk firmware upgrade, status monitoring, and statistical analysis. Furthermore, for those who are already using a Vigor Router that supports central management feature, they can manage the VigorAP 902 through the router’s web user interface as well.

VigorAP 902APM
  • 5 x 10/100/1000M Base-T RJ-45 including 1 x PoE-capable Port
  • 1 x USB 2.0 port
  • 2 x Detachable Antenna
  • Factory Reset Button
  • DC Power Jack
  • Security Lock
Power Input
  • DC Input 12V @1A
  • PoE 802.3af
Power Saving
  • U-APSD
Max. Power Consumption
  • 12 watts
  • Operating: 0°C ~ 40°C
  • Storage: -20°C ~ 60°C
  • Operating: 10% ~ 90%(non-condensing)
Dimension (mm)
  • 167.8(L) x 107.7(W) x 45.1(D)
Max. TX Power
  • 2.4 GHz:18 dBm
  • 5 GHz:19 dBm
Radio Management
  • Auto Channel Selection
  • Auto Channel Width
  • Wi-Fi Scheduling
LAN Subnet
  • Up to 2 Subnet
IP Configuration
  • DHCP Client
  • Static IP
  • 802.11 b/g/n (2.4G)
  • 802.11a/n/ac (5G)
  • Up to 64 clients per radio
  • DHCP Server
  • DHCP Relay Agent
  • MAC Clone
  • Up to 4 SSID per radio
  • SSID-based 802.1Q VLAN
  • WEP, WEP-802.1x, WPA-PSK, WPA-802.1x, WPA2-PSK, WPA2-802.1x
  • Hidden SSID
  • Client Isolation
  • Access Control per SSID
  • WPS
802.1x Authentication
  • Internal RADIUS Server: PEAP
Performance Optimization
  • Bandwidth Limit Per Station
  • Auto-Adjustment Bandwidth Limit when spare bandwidth available
  • AirTime Fairness
  • WMM
Load Balancing
  • Client Limit per radio
  • Client Limit per SSID
  • Band Steering
  • Traffic Limit per radio *
  • Force Overload Disassociation by RSSI Threshold, Idle Time *
    (*:controller required)
  • Fast Roaming (WPA2/802.1x)
  • AP-Assisted Roaming (Disassociation by Basic Rate threshold, RSSI threshold, RSSI threshold with stronger signal guaranteed)
Mobile Device Management
  • Access Control by device type
  • Policy per SSID
  • Client OS Statistics
Operating Mode
  • Access Point
  • Universal Repeater
  • AP Bridge Point-to-Point (2.4 GHz only)
  • AP Bridge Point-to-Multipoint (2.4 GHz only)
  • AP Bridge WDS (2.4 GHz only)
  • Web Interface: HTTP, HTTPS
  • Command-Line Interface: Telnet
  • SNMP v2, v2c, v3
  • TR-069 via VigorACS
  • Vigor Router AP Management
  • Configuration File Export & Import
F/W Upgrade
  • HTTP
  • TR-069 via VigorACS
  • Vigor Router AP Management
Diagnostic Tool
  • Syslog
  • Speed Test
  • AP Discovery
  • WLAN Statistics
  • Station Statistics