Loading
LOADING IMAGES
VigorAP 710 blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg

VigorAP 710

11n Wireless Access Point
  • 802.11n compliant with 2x2 MIMO
  • Delivers data rate of up to 300 Mbps
  • 1 x 10/100 Base-T LAN port
  • Up to 4 SSIDs with unique Subnet, VLAN, Access Control, Bandwidth Limit settings
  • Built-in RADIUS server for 802.1x authentication
  • AirTime Fairness support
  • Improve roaming experience by Fast Roaming & AP-assisted Roaming
  • Provide multiple operating modes - AP, Bridge, WDS, and Universal Repeater
  • Support both stand-alone and controller-based setup

About

The VigorAP 710 is a 11n 2.4 GHz wireless access point with business-grade features provided, including multiple SSIDs, AirTime Fairness, built-in RADIUS server, AP-assisted roaming and Mobile Device Management. VigorAP 710 is not just a wireless access, and it also can be operated as a wireless bridge or repeater to extend the local network to where physical lines are not available.

 

Multiple SSID & Built-in RADIUS Server

VigorAP 710 can be used to provide Wi-Fi service to staff and guest at the same time, up to 4 SSIDs can be configured on VigorAP 710, and each of the SSID can be mapped to a different VLAN and have a unique security settings. You may set up a guest SSID which uses shared passphrase but have limited access, and a staff SSID that requires the more secure 802.1x authentication (instead of using a shared password, this requires a unique username and password for each user) but have the full access to the network. VigorAP 710 is an integrated solution for a business network which would does not have an authentication server (i.e., a RADIUS server) deployed yet, since it can do 802.x authentication based on the local user accounts, and also act as the RADIUS server for other devices  (e.g., a router) on the network.

 

Acting as Wireless Bridge 

Except for being a access point, VigorAP 710 can also be used as a wireless bridge to connect to other VigorAP to extend the local network to where physical lines are not available. Various operating modes are supported, it can be a wireless bridge and still accept wireless clients at the same time, or be a Universal Repeater foe connecting to other brand's access point or Wi-Fi router to extend their wireless coverage.

VigorAP 902APM

 

Roaming

For a network where multiple access points are deployed, VigorAP 710 provides solutions to improve the Wi-Fi client’s roaming experience. While roaming is a choice of the client device, VigorAP 710 can help the client switching to another access point which offers better signal by the feature called “AP-Assisted Roaming”, custom conditions can be set including a stronger signal guaranteed. (Learn more about AP-Assisted Roaming by visiting our FAQ)

  

VigorAP 710 Front Panel

front 
Hardware
Interface
  • 1 Fast Ethernet LAN port 
  • 2 SMA Detachable Antenna
  • Factory Reset Button
  • WLAN ON/ WLAN OFF/ WPS Button
  • Power On/Off switch
Power Input
  • DC Input 12V @1A
Max. Power Consumption
  • 3.3 watts
Temperature
  • Operating: 0°C ~ 45°C
  • Storage: -20°C ~ 70°C
Humidity
  • Operating: 10% ~ 90%(non-condensing)
Dimension (mm)
  • 112(W) x 132(H) x 43(D)
Radio
Radio Management
  • Auto Channel Selection
  • Auto Channel Width
  • Wi-Fi Scheduling
Frequency
(802.11b/g/n)
  • USA: 2.412 - 2.462 GHz
  • Europe ETSI:
    2.412 - 2.472 GHz
LAN
IP Configuration
  • DHCP Client
  • Static IP
Wireless
Standards
  • 802.11 b/g/n (2.4G)
  • 2T2R
WLAN
  • Up to 64 clients
  • DHCP Server
  • DHCP Relay Agent
  • MAC Clone
SSID
  • Up to 4 SSIDs
  • SSID-based 802.1Q VLAN
Security
  • WEP, WEP-802.1x, WPA-PSK, WPA-802.1x, WPA2-PSK, WPA2-802.1x
  • Hidden SSID
  • Client Isolation
  • Access Control per SSID
  • WPS
802.1x Authentication
  • Internal RADIUS Server: PEAP
  • RADIUS Proxy: PEAP, EAP-TLS
Performance Optimization
  • Bandwidth Limit Per Station
  • Auto-Adjustment Bandwidth Limit when spare bandwidth available
  • AirTime Fairness
  • WMM
Load Balancing
  • Client Limit per radio
  • Client Limit per SSID
  • Traffic Limit per radio *
  • Force Overload Disassociation by RSSI Threshold, Idle Time *
    (*:controller required)
Roaming
  • Fast Roaming (WPA2/802.1x)
  • AP-Assisted Roaming (Disassociation by Basic Rate threshold, RSSI threshold, RSSI threshold with stronger signal guaranteed)
Mobile Device Management
  • Access Control by device type
  • Policy per SSID
  • Client OS Statistics
Operating Mode
  • Access Point
  • Station-Infrastructure
  • Universal Repeater
  • AP Bridge Point-to-Point
  • AP Bridge Point-to-Multipoint
  • AP Bridge WDS 
Management
Configuration
  • Web Interface: HTTP, HTTPS
  • Command-Line Interface: Telnet
  • TR-069 via VigorACS
  • Vigor Router AP Management
  • Configuration File Export & Import
F/W Upgrade
  • HTTP
  • TR-069 via VigorACS
  • Vigor Router AP Management
Diagnostic Tool
  • Syslog
  • Speed Test
  • AP Discovery
  • WLAN Statistics
  • Interference Monitor
  • Station Statistics
  • Station Airtime
  • Station Link Speed