Loading
LOADING IMAGES
Vigor2910VG blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg

Vigor2910VG

  • Suport 3.5G / HSDPA USB modem for load balancing or fail over
  • Dual-WAN with load balancing and redundancy
  • 32 VPN tunnels
  • Policy-based firewall
  • CSM (Content Security Management)
  • Bandwidth management
  • QoS for high VoIP quality
  • Super G supports up to 108Mbps wireless connection speed
  • Support TR-069

  • ACS SI
  • CSM
  • Dual-WAN
  • Firewall
  • Network Management
  • P2P
  • USB
  • VoIP
  • VPN
  • WLAN

The Vigor2910 series provides a configurable second WAN interface and supports policy-based load-balancing and connection fail-over on dual-WAN interface. Except the QoS function for the original IP layer, it also supports NAT session/bandwidth management which increases the usage efficiency of bandwidth greatly.

Voice-over-IP(VoIP) is extensively supported with providing two separate phone ports and multiple SIP registrars with highly flexible configuration and call handling options.

Wireless supports connection rate up to 108Mbps with Super G™ feature. In addition to WEP/WPA/WPA2 and MAC Address Control, the router also provides Wireless VLAN, 802.1X authentication and Wireless LAN isolation mechanism for the network security. The Flexible design of firewall function makes users configuring the policies of firewall more easily and conveniently.

 

 

Interface of Vigor2910VG
Hardware Interface LAN Maximum 4-port 10/100 Base-TX Switch
WAN Maximum 2-port 10/100 Base-TX Ethernet
WLAN IEEE802.11b/g with Super G™
VoIP 2-port FXS
USB 1-port USB for connecting to USB printer or 3.5G USB Modem
Temperature
Operating : 0°C ~ 45°C
Storage : -25°C ~ 70°C
Humidity 10% ~ 90% (non-condensing)
Max. Power 10 Watt
Dimension L220 * W160 * H36 (mm)
Power DC 12V ~ 15V

 

1. Dual-WAN
  • Outbound Policy-Based Load-Balance
  • BoD (Bandwidth on Demand)
  • WAN Connection Fail-over
2. VoIP
  • Protocol : SIPv2 (RFC3261), RTP / RTCP
  • Six SIP Registrars
  • G.168 Line Echo-Cancellation
  • Automatic Gain Control
  • Jitter Buffer (125ms)
  • Codec Feature:
    • G.711 A/µ Law
    • G.723.1
    • G.726
    • G.729 A/B
    • VAD / CNG
  • Tone Generation and Detection : DTMF, Dial, Busy, Ring Back, Call Progress
  • FAX / Modem Support :
    • G.711 Pass-through
    • T.38 for FAX
  • Supplemental Services :
    • Call Hold / Retrieve
    • Call Waiting
    • Call Transfer
    • Call Forwarding (Always, Busy and No Answer)
    • DND (Do not Disturb)
    • Hotline
3. Wireless Access Point
  • IEEE802.11b/g Compliant
  • Super G™ 108Mbps
  • Wireless Client List
  • Access Point Discovery
  • WDS (Wireless Distribution System)
  • Wireless LAN Isolation
  • Wireless Station Rate-Control
  • WPA / WPA2
  • 64/128-bit WEP
  • 802.1X Authentication with RADIUS Client
  • Hidden SSID
  • MAC Address Access Control
  • Wireless VLAN
4. WAN Protocol
  • DHCP Client
  • Static IP
  • PPPoE
  • PPTP
  • BPA
  • L2TP
5. Firewall
  • CSM (Content Security Management) for IM/P2P Application
  • Multi-NAT, DMZ Host, Port-Redirection/Open Port
  • Policy-Based IP Packet Filter
  • DoS/DDoS Protection
  • IP Address Anti-Spoofing
  • E-Mail Alert and logging via Syslog
  • Bind IP to MAC Address
6. VPN
  • Up to 32 VPN Tunnels
  • Protocol: PPTP, IPSec, L2TP, L2TP over IPSec
  • Encryption: AES, MPPE and Hardware-Based DES/3DES
  • Authentication: MD5, SHA-1
  • IKE Authentication: Pre-shared Key and Digital Signature (X.509)
  • LAN-to-LAN, Teleworker-to-LAN
  • DHCP over IPSec
  • NAT-Traversal (NAT-T)
  • Dead Peer Detection (DPD)
  • VPN Pass-Through
  • VPN Backup
7. USB
  • 3.5G USB Modem (3.5G only can act as WAN2)
  • USB Printer
8. Bandwidth Management
  • Guarantee Bandwidth for VoIP
  • Class-based Bandwidth Guarantee by User-Defined Traffic Categories
  • DiffServ Code Point Classifying
  • 4-level Priority for Each Direction (Inbound/Outbound)
  • Bandwidth Borrowed
  • Bandwidth/Session Limitation
9. Network Management
  • Support TR-069
  • Web-Based User Interface (HTTP/HTTPS)
  • Quick Start Wizard
  • CLI (Command Line Interface) / Telnet/SSH*
  • Administration Access Control
  • Configuration Backup/Restore
  • Built-in Diagnostic Function
  • Firmware Upgrade via TFTP/FTP
  • Logging via Syslog
  • SNMP Management with MIB-II
10. Content Filter
  • URL Keyword Blocking (White list and Black list)
  • Java Applet, Cookies, Active X, Compressed / Executable / Multimedia File Blocking
  • Web Content Filter
  • Time Schedule Control
11. Network Features
  • DHCP Client/Relay/Server
  • Dynamic DNS
  • NTP Client
  • Call Scheduling
  • RADIUS Client
  • DNS Cache/Proxy
  • UPnP
  • Port-Based VLAN
  • Configurable WAN2
  • Routing Protocol:
    • Static Routing
    • RIP V2
The Vigor2910 series provides a configurable second WAN interface and supports policy-based load-balancing and connection fail-over on dual-WAN interface. Except the QoS function for the original IP layer, it also supports NAT session/bandwidth management which increases the usage efficiency of bandwidth greatly.

Voice-over-IP(VoIP) is extensively supported with providing two separate phone ports and multiple SIP registrars with highly flexible configuration and call handling options.



Figure 1 . Back Panel



Dual WAN Application
It allows users to access Internet and combine the bandwidth of the dual WAN to speed up the transmission through the network. Each WAN port can connect to different ISPs, Even if the ISPs use different technology to provide telecommunication service (such as DSL, Cable modem, etc.). If any connection problem occurred on one of the ISP connections, all the traffic will be guided and switched to the normal communication port for proper operation.


Figure 2 . Dual WAN

VPN Backup Application
What is VPN Backup?
If there is only one VPN tunnel between the main office and a remote branch office, when this VPN connection is dropped and can't be restored within minutes because of a network problem, you have to wait hours or days until the network administrator manually create another VPN connection. This will impact business operations and revenue.

With the DrayTek VPN Backup feature you can maintain a permanent connection between two sites. Once a VPN connection is dropped, an automatic backup VPN connection will be implemented.

Example :
A VPN TRUNK profile with member 1 (IPSec type) and Member 2(L2TP over IPSec) has been created for Router A for connecting with Router B. In general, Router A connects to Router B through Member 1 VPN tunnel (with IPSec type).

However, if the connection is off-line, Router A will use Member 2 VPN tunnel (with L2TP over IPSec) instead to connect Router B right away.

Figure 3 . VPN Backup Application



Subsidiary in Asia can use vigor router as VPN client. Every day it should transmit ERP, Mail or order information to headquarter in Europe. The Vigor router can build another backup VPN tunnel to subsidiary in America through LAN-to-LAN, and the VPN server in the subsidiary in American can build Routing /RIP. When the VPN tunnel is off-line, the subsidiary in Asia can send the data (that should be transmit to headerquarter in Europe) to the subsidiary in America, then the subsidiary in America transmit the data to headerquarter in Europe through VPN server by using VPN tunnel backup connection.


Figure 4 . VPN Backup Application

More Application
 

3.5G Application

DrayTek supports 3.5G HSDPA USB Modem via USB port of Vigor2910 series from firmware version V3.0.6 and above. It is a good application for the mobile sharing environment.

For 3.5G mobile communication through Access Point is popular more and more, Vigor 2910 adds the function of 3.5G network connection for such purpose. By connecting 3.5G USB Modem to the USB port of Vigor2910, it can support HSDPA/UMTS/EDGE/GPRS/GSM and the future 3.5G standard (HSDPA, etc). Vigor2910 with 3.5G USB Modem allows you to receive 3.5G signals at any place such as your car or certain location holding outdoor activity and share the bandwidth for using by more people. Users can use four LAN ports on the router to access Internet.





Figure 5 . 3.5G Application Figure



Figure 6 . 3.5G Application Figure

 
After connecting into the router, 3.5G USB Modem will be regarded as the second WAN port. However, the original Ethernet WAN1 still can be used and Load-Balance can be done in the router. Besides, 3.5G USB Modem in WAN2 also can be used as backup device. Therefore, when WAN1 is not available, the router will use 3.5G for supporting automatically. The supported 3.5G USB Modem will be listed on Draytek web site.

Wireless Application

Wireless supports connection rate up to 108Mbps with Super G™ feature. In addition to WEP/WPA/WPA2 and MAC Address Control, the router also provides Wireless VLAN, 802.1X authentication and Wireless LAN isolation mechanism for the network security. The Flexible design of firewall function makes users configuring the policies of firewall more easily and conveniently.

 
Figure 7. Wireless Connection



Smart VPN Client Application



 
Figure 8. Smart VPN Client