Loading
LOADING IMAGES
Vigor2910 blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg blank.jpg

Vigor2910

  • Suport 3.5G / HSDPA USB modem for load balancing or fail over
  • Dual-WAN with load balancing and redundancy
  • 32 VPN tunnels
  • Policy-based firewall
  • CSM (Content Security Management)
  • Bandwidth management
  • Support TR-069

  • ACS SI
  • CSM
  • Dual-WAN
  • Firewall
  • Network Management
  • P2P
  • USB
  • VPN

The Vigor2910 series provides a configurable second WAN interface and supports policy-based load-balancing and connection fail-over on dual-WAN interface. Except the QoS function for the original IP layer, it also supports NAT session/bandwidth management which increases the usage efficiency of bandwidth greatly.

It allows users to access Internet and combine the bandwidth of the dual WAN to speed up the transmission through the network. Each WAN port can connect to different ISPs, Even if the ISPs use different technology to provide telecommunication service (such as DSL, Cable modem, etc.). If any connection problem occurred on one of the ISP connections, all the traffic will be guided and switched to the normal communication port for proper operation.

DrayTek supports 3.5G HSDPA USB Modem via USB port of Vigor2910 series from firmware version V3.0.6 and above. It is a good application for the mobile sharing environment.

 

 

Interface of Vigor2910
Hardware Interface LAN Maximum 4-port 10/100 Base-TX Switch
WAN Maximum 2-port 10/100 Base-TX Ethernet
USB 1-port USB for connecting to USB printer or 3.5G USB Modem
Temperature
Operating : 0°C ~ 45°C
Storage : -25°C ~ 70°C
Humidity 10% ~ 90% (non-condensing)
Max. Power 10 Watt
Dimension L220 * W160 * H36 (mm)
Power DC 12V ~ 15V

 

1. Dual-WAN
  • Outbound Policy-Based Load-Balance
  • BoD (Bandwidth on Demand)
  • WAN Connection Fail-over
2. WAN Protocol
  • DHCP Client
  • Static IP
  • PPPoE
  • PPTP
  • BPA
  • L2TP
3. Firewall
  • CSM (Content Security Management) for IM/P2P Application
  • Multi-NAT, DMZ Host, Port-Redirection/Open Port
  • Policy-Based IP Packet Filter
  • DoS/DDoS Protection
  • IP Address Anti-Spoofing
  • E-Mail Alert and logging via Syslog
  • Bind IP to MAC Address
4. VPN
  • Up to 32 VPN Tunnels
  • Protocol: PPTP, IPSec, L2TP, L2TP over IPSec
  • Encryption: AES, MPPE and Hardware-Based DES/3DES
  • Authentication: MD5, SHA-1
  • IKE Authentication: Pre-shared Key and Digital Signature (X.509)
  • LAN-to-LAN, Teleworker-to-LAN
  • DHCP over IPSec
  • NAT-Traversal (NAT-T)
  • Dead Peer Detection (DPD)
  • VPN Pass-Through
  • VPN Backup
5. USB
  • 3.5G USB Modem(3.5G only can act as WAN2)
  • USB Printer
6. Bandwidth Management
  • Class-based Bandwidth Guarantee by User-Defined Traffic Categories
  • DiffServ Code Point Classifying
  • 4-level Priority for Each Direction (Inbound/Outbound)
  • Bandwidth Borrowed
  • Bandwidth/Session Limitation
7. Network Management
  • Support TR-069
  • Web-Based User Interface (HTTP/HTTPS)
  • Quick Start Wizard
  • CLI (Command Line Interface) / Telnet/SSH*
  • Administration Access Control
  • Configuration Backup/Restore
  • Built-in Diagnostic Function
  • Firmware Upgrade via TFTP/FTP
  • Logging via Syslog
  • SNMP Management with MIB-II
8. Content Filter
  • URL Keyword Blocking (White list and Black list)
  • Java Applet, Cookies, Active X, Compressed / Executable / Multimedia File Blocking
  • Web Content Filter
  • Time Schedule Control
9. Network Features
  • DHCP Client/Relay/Server
  • Dynamic DNS
  • NTP Client
  • Call Scheduling
  • RADIUS Client
  • DNS Cache/Proxy
  • UPnP
  • Port-Based VLAN
  • Configurable WAN2
  • Routing Protocol:
    • Static Routing
    • RIP V2
The Vigor2910 series provides a configurable second WAN interface and supports policy-based load-balancing and connection fail-over on dual-WAN interface. Except the QoS function for the original IP layer, it also supports NAT session/bandwidth management which increases the usage efficiency of bandwidth greatly.



Figure 1 . Back Panel


Dual WAN Application
It allows users to access Internet and combine the bandwidth of the dual WAN to speed up the transmission through the network. Each WAN port can connect to different ISPs, Even if the ISPs use different technology to provide telecommunication service (such as DSL, Cable modem, etc.). If any connection problem occurred on one of the ISP connections, all the traffic will be guided and switched to the normal communication port for proper operation.


Figure 2 . Dual WAN

VPN Backup Application
What is VPN Backup?
If there is only one VPN tunnel between the main office and a remote branch office, when this VPN connection is dropped and can't be restored within minutes because of a network problem, you have to wait hours or days until the network administrator manually create another VPN connection. This will impact business operations and revenue.

With the DrayTek VPN Backup feature you can maintain a permanent connection between two sites. Once a VPN connection is dropped, an automatic backup VPN connection will be implemented.

Example :
A VPN TRUNK profile with member 1 (IPSec type) and Member 2(L2TP over IPSec) has been created for Router A for connecting with Router B. In general, Router A connects to Router B through Member 1 VPN tunnel (with IPSec type).

However, if the connection is off-line, Router A will use Member 2 VPN tunnel (with L2TP over IPSec) instead to connect Router B right away.

Figure 3 . VPN Backup Application



Subsidiary in Asia can use vigor router as VPN client. Every day it should transmit ERP, Mail or order information to headquarter in Europe. The Vigor router can build another backup VPN tunnel to subsidiary in America through LAN-to-LAN, and the VPN server in the subsidiary in American can build Routing /RIP. When the VPN tunnel is off-line, the subsidiary in Asia can send the data (that should be transmit to header quarter in Europe) to the subsidiary in America, then the subsidiary in America transmit the data to header quarter in Europe through VPN server by using VPN tunnel backup connection.


Figure 4 . VPN Backup Application


 



3.5G Application

DrayTek supports 3.5G HSDPA USB Modem via USB port of Vigor2910 series from firmware version V3.0.6 and above. It is a good application for the mobile sharing environment.

For 3.5G mobile communication through Access Point is popular more and more, Vigor 2910 adds the function of 3.5G network connection for such purpose. By connecting 3.5G USB Modem to the USB port of Vigor2910, it can support HSDPA/UMTS/EDGE/GPRS/GSM and the future 3.5G standard (HSDPA, etc). Vigor2910 with 3.5G USB Modem allows you to receive 3.5G signals at any place such as your car or certain location holding outdoor activity and share the bandwidth for using by more people. Users can use four LAN ports on the router to access Internet.





Figure 5 . 3.5G Application Figure



Figure 6. 3.5G Application Figure


 
After connecting into the router, 3.5G USB Modem will be regarded as the second WAN port. However, the original Ethernet WAN1 still can be used and Load-Balance can be done in the router. Besides, 3.5G USB Modem in WAN2 also can be used as backup device. Therefore, when WAN1 is not available, the router will use 3.5G for supporting automatically. The supported 3.5G USB Modem will be listed on Draytek web site.


Smart VPN Client Application




 
Figure 7. Smart VPN Client