We have launched the new version of the DrayTek website, and this content is no longer being maintained.
You will find more information on our new site; however, we will keep this page for a few months.

How to reboot Vigor AP with Schedule?

Support Model : VigorAP 710VigorAP 800VigorAP 810VigorAP 900VigorAP 902VigorAP 910CVigorAP 700

Vigor AP supports time schedule function, that network administrator can use it to Auto Reboot AP, turn on or off the Wi-Fi signal and LED. In this article, we will explain how to set VigorAP reboot with schedule.


Set up System Time

In order to run the schedule correctly, you need to inquire the correct time for the AP’s system time.

1. Go to System Maintenance >> Time and Date, select Use Internet Time in the Time Setting box. Select Time Zone, press Use Default NTP Server, enable Daylight Saving if needed. Click OK to save the setting.



Set up Reboot Schedule

2.Go to Applications >> Schedule page, Enable Schedule and press OK. Press Add to add and edit a new schedule profile.



3. In this example, we want AP to Auto reboot at the non-business time every working day.

a. Check the Enable in Add Schedule box.

b. Set the Start Date and Start Time.

c. Select Auto Reboot as Action.

d. Select Routine as Acts and check the Weekdays from Monday to Friday.

e. Click OK to save the schedule profile.


After finish the above configuration, VigorAP will reboot automatically according to the schedule provide we set.


Was this article helpful?
39How to reboot Vigor AP with Schedule? has been viewed------ 39 ------times.