SmartVPN iOS app to Vigor Router - SSL VPN
The video was presented by DrayTek Aust & NZ
This note demonstrates how to use SmartVPN iOS app (available on Apple App store) to establish SSL VPN tunnel to Vigor Router.
Set up Vigor Router
1. Create user profiles for SSL VPN clients. Go to VPN and Remote Access >> Remote Dial-in User.
- Make sure SSL Tunnel is enabled in Dial-In Type.
- Enter Username and Password.
- Click OK to save
Set up iOS Devices
2. Open Smart VPN App on an iOS device
a. Go to Settings >> Verify Level, and select Basic
b. Tap + to add a VPN profile
c. Type Server as the domain name or IP address of Vigor router
d. Type Username and Password then tap Save
e. Allow the confirmation
f. Tap the VPN profile you would like to connect
g. Tap Connect to establish SSL VPN. After the VPN is established, we can see the information of VPN