Vigor3900 to Vigor3900 - IKEv2

Support Model : Vigor3900Vigor2960
  • Tags :

Modified from the previous version IKEv1, IKEv2 is a new VPN protocol and has lots of improvements then the former. It is more stable, more secure and faster connection establishing speed. Support newer and more complicated secure ciphers to make the connection more secure. Using new connection progress and discard the PPP, IKEv2 provides the faster establishing speed.

Since firmware version 1.3.0, Vigor3900 and Vigor2960 start to support IKEv2 VPN tunnel, users can benefit from this new supporting VPN protocol. This application note demonstrates how to establish IKEv2 VPN connection between two Vigor3900 by following topology.

   

 

(This article applies to Vigor3900 and Vigor2960, for other models, please refer to the article here.)
(For establishing IKEv2 connecting between Vigor Router and Vigor3900 or Vigor2960, please refer to the article here.)

 

VPN Server Settings

  1. Go to VPN and Remote Access >> IPsec General Setup,

  1. Type in Preshared Key
  2. Click Apply
   

  2. Go to VPN and Remote Access >> VPN Profiles and click Add,

  1. Type LAN_S in Local IP/Subnet Mask
  2. Type LAN_C in Remote IP/Subnet Mask
  3. Select IKEv2 as IKE Protocol
  4. Click Apply
   

 

 

VPN Client Settings

  3. Go to VPN and Remote Access>>VPN Profiles and click Add,

  1. Type LAN_C in Local IP/Subnet Mask
  2. Type WAN IP or Domain of VPN server in Remote Host
  3. Type LAN_S in Remote IP/Subnet Mask
  4. Select IKEv2 as IKE Protocol
  5. Type in Preshared Key of VPN server
  6. Click Apply
   

  4. Go to VPN and Remote Access >> Connection Management,

  1. Select the VPN profile
  2. Click Connect
   

After VPN is established successfully, the VPN status can be seen on VPN and Remote Access >> Connection Management.

   
Was this article helpful ?
51Vigor3900 to Vigor3900 - IKEv2 has been viewed------ 51 ------times.