Vigor Router to Vigor Router - PPTP

Support Model :
  • Tags :

This note will explain how to establish a PPTP LAN-to-LAN VPN between two Vigor Routers.

   

Configuring the VPN server

1. Go to VPN and Remote Access >> LAN to LAN, edit a profile as follows:

  1. Enable this profile, and enter Profile Name.
  2. Set Call Direction to Dail-In.
  3. Enter Username and Password.
  4. Enter Remote Network IP as the LAN network of VPN Client
   

Configuring the VPN Client

2. Go to VPN and Remote Access >> LAN to LAN, edit a profile as follows:

  1. Enable this profile, and enter Profile Name.
  2. Set Call Direction to Dail-Out.
  3. Enalbe PPTP in the Dial-out settings
  4. Enter Server IP as the WAN IP of VPN server
  5. Enter Username and Password as same as the one set on VPN Server
  6. Enter Remote Network IP as the LAN Network of VPN server
   

3. Go to VPN and Remote Access >> Connection Management to dial the VPN and check the VPN connectivity.

   
Was this article helpful ?
23Vigor Router to Vigor Router - PPTP has been viewed------ 23 ------times.