Types of VigorSwitch SFP Modules

There are two types of media for the SFP Module of these models

 Models support SFP ports
 VigorSwitch 2080
 VigorSwitch G2240
 VigorSwitch P2260
 VigorSwitch G2260
 VigorSwitch G1280
 VigorSwitch P1280
 VigorSwitch P2261

TP and SFP Fiber (LC, BiDiLC…). This port supports 10/100/1000Mbps TP or 1000Mbps SFP Fiber with auto-detected function. 1000Mbps SFP Fiber transceiver is used for high-speed connection expansion. Below shows optional SFP types compatible for the switch:

  • 1000Mbps LC, MM, SFP Fiber transceiver (SFP.0LC.202)
  • 1000Mbps LC, SM 10km, SFP Fiber transceiver (SFP.0LC.212.10)
  • 1000Mbps LC, SM 30km, SFP Fiber transceiver (SFP.0LC.212.30)
  • 1000Mbps LC, SM 50km, SFP Fiber transceiver (SFP.0LC.212.50)
  • 1000Mbps BiDi LC, type 1, SM 20km, SFP Fiber WDM transceiver (SFP.0BL.621.201)
  • 1000Mbps BiDi LC, type 2, SM 20km, SFP Fiber WDM transceiver (SFP.0BL.621.202)
  • 1000Mbps LC, SM 10km, SFP Fiber transceiver with DDM (SFP.DLC.212.10)

The following list included the modules we've tested, these modules can work properly in our SFP ports. In addition, the module which is not on the list should be supported if it meets the correct specification and standards.  
 Tested Modules
 MNC(PTED3-D0C-8V)
 MNC(PTE10-D0C)
 AXCEN(AXXE-3386-0533)
 ZyXEL(SFP10G-LR)
 ZyXEL(SFP10G-SR)

Note:

10/100/1000Mbps TP is a standard Ethernet port that meets all IEEE 802.3/u/x/z Gigabit and Fast Ethernet specifications.
1000Mbps SFP Fiber transceiver is a Gigabit Ethernet port that fully complies with all IEEE 802.3z and 1000Base-SX/LX standards.
1000Mbps Single Fiber WDM (BiDi) transceiver is designed with an optic Wavelength Division Multiplexing (WDM) technology that transports bi-directional full duplex signal over a single fiber simultaneously.

Was this article helpful?
21Types of VigorSwitch SFP Modules has been viewed------ 21 ------times.