How to detect router name of CPE and display it automatically on the VigorACS 2?


While CPE joins to the ACS at the first time, ACS will assign the name to CPE with the default naming rule (ModelName_MAC). However, we could enable the option 47-AutoDetectRouterName from System >> System Parameter page of VigorACS 2.

 

 

Router Name setting of CPE

Once you enabled the "AutoDetectRouterName" option from VigorACS 2, please remember to specify the unique device name for each CPE. You may refer the following instruction for the different model:

  • DrayOS Model
    The Router name field could be found from System Maintenance >> Management. 
    Corresponding TR-069 Parameter: InternetGatewayDevice.X_00507F_System.Management.RouterName



  • 3900/2960/300B
    The Router name field could be found from System Maintenance >> Syslog/Mail Alert >> Syslog Access Setup.
    Corresponding TR-069 Parameter: InternetGatewayDevice.X_00507F_System.SyslogMail.SysLogAccess.LogRouterName




  • VigorAP
    The Router name field could be found from System Maintenance >> Management.
    Corresponding TR-069 Parameter: InternetGatewayDevice.X_00507F_System.Management.RouterName
Was this article helpful?
9How to detect router name of CPE and display it automatically on the VigorACS 2? has been viewed------ 9 ------times.