Why can I see Vigor Router's Web Login Page from WAN by HTTPS when "Allow management from the Internet" is disabled?

Support Model :
  • Tags :

Vigor Router which supports SSL VPN function will open TCP Port 443 from WAN for accepting SSL VPN Clients' dialing in by default. That's why we can see Vigor's Web Login page by HTTPS from WAN even the Allow Management from the Internet option is not enabled. There are two methods to make the Web Login page won’t be seen on default HTTPS page from the internet, we can do either of the following configuration changes if you do not use the SSL VPN feature of the Vigor Router. However, if you do use Vigor Router to provide the SSL VPN connection, you can only use the second method to achieve the purpose.

Method 1. Disable SSL VPN Service

Deselect Enable SSL VPN Service in VPN and Remote Access >> Remote Access Control Setup page.

   

Method 2. Change SSL VPN Port from Default to the other one

Modify the Port for SSL VPN Service from default port 443 to the other one on SSL VPN >> General Setup page. Please notice that the SSL VPN clients should change the connection port to the one you set.

   
Was this article helpful ?
41Why can I see Vigor Router's Web Login Page from WAN by HTTPS when "Allow management from the Internet" is disabled? has been viewed------ 41 ------times.