[Vigor3900] How to provision a VigorAP by AP Management (APM)?

Support Model : Vigor3900Vigor2960Vigor300B
  • Tags :

This document describes how to provision VigorAP with the AP Management (APM) feature on Vigor3900/2960/300B. We will take an environment constructed with Vigor3900 and AP910C as example, and demonstrate how to provision the setting from Vigor3900 APM to AP910C.

(This article applies to Vigor3900, Vigor2960 and Vigor300B, for other models, please refer to the article here.)

 

 

   

 

Edit WLAN Profile

1. On Vigor3900, go to Central Management >> AP Management >> WLAN Profile, select an available profile then click Edit / Add.

   

 

2. Set up the WLAN profile, configure the general settings. 

   

 

 3. Edit detail settings of each SSID of 2.4G WLAN.

   

 

 4. Edit detail settings of each SSID of 5G WLAN.

   

 

 

Apply Settings to AP

5. Select the profile you would like to apply to AP, then click Apply To Device.

   

 

6. Select the AP you would like to send the configuration to, then click Apply.

   

 

7. Wait for APM to apply the configuration. After you see the "Profile Apply Success.", your AP should work as the WLAN profile you set.

   

 

8. We can go to AP Management >> Status to check does the status change as expected.

   

 

Was this article helpful ?
57[Vigor3900] How to provision a VigorAP by AP Management (APM)? has been viewed------ 57 ------times.