Vigor2200 series Settings(Dial Out)
From the Setup Main Menu select " IKE/IPSec Setup ".
Fill in the Pre-Shares Key password entered in Checkpoint.
Choose High (ESP) with DES or 3DES.
Select " LAN-to-LAN Dialer Profile Setup " and click on the index 1 for the first profile.
In this example the Profile Name will be VPNtoCP.
At this point, both VPN gateways should be appropriately configured to pass traffic between the two networks. A simple ping test displays the following in the Check Point Log Viewer. There should be Key Install messages for IKE Phase 1 and Phase 2, as well as encryption / decryption for the traffic passed. (You will need to expand the width of the Info field to see the complete message.
|