|
|
|
|
The Vigor2930 is a Dual-WAN router with policy-based load-balance, fail-over and BoD (Bandwidth on Demand) ; it also features advanced bandwidth control mechanisms such as IP-layer QoS, NAT session limitation, bandwidth borrowed, etc., to allow easy, flexible and reliable access control and bandwidth management.
It allows users to access Internet and combine the bandwidth of the dual WAN to speed up the transmission through the network. Each WAN port can connect to different ISPs, Even if the ISPs use different technology to provide telecommunication service (such as DSL, Cable modem, etc.). If any connection problem occurred on one of the ISP connections, all the traffic will be guided and switched to the normal communication port for proper operation.
Without the necessity of installing VPN client on individual PC, the Secure Socket Layer (SSL) virtual private network (VPN) facility lets remote workers connect to the office network at any one time. SSL is supported by standard web browsers such as FireFox and IE. For users of small offices and teleworkers who need to access enterprises's internal applications, file server and file sharing, Vigor2930 security router series allow up to 30 concurrent SSL sessions.
1. Dual-WAN
- Outbound Policy-Based Load-Balance
- BoD (Bandwidth on Demand)
- WAN Connection Fail-over
|
2. SSL VPN
- Up to 30 SSL VPN Tunnels
- SSL Web Proxy
|
3. WAN Protocol
- DHCP Client
- Static IP
- PPPoE
- PPTP
- L2TP *
- BPA
|
4. Firewall
- CSM (Content Security Management) for IM / P2P Applications
- Multi-NAT, DMZ Host, Port-Redirection and Open Port
- Policy-Based Firewall
- MAC Address Filter
- SPI (Stateful Packet Inspection)
- DoS / DDoS Protection
- IP Address Anti-spoofing
- E-Mail Alert and Logging via Syslog
- Bind IP to MAC Address
|
5. VPN
- Up to 100 VPN Tunnels
- Protocol : PPTP , IPSec , L2TP , L2TP over IPSec
- Encryption : MPPE and Hardware-Based AES / DES / 3DES
- Authentication : Hardware-Based MD5 , SHA-1
- IKE Authentication : Pre-shared Key and Digital Signature (X.509)
- LAN-to-LAN , Teleworker-to-LAN
- DHCP over IPSec
- NAT-Traversal (NAT-T)
- Dead Peer Detection (DPD)
- VPN Pass-Through
- VPN Backup
- VPN Load-balance
|
6. Bandwidth Management
- QoS :
- Guarantee Bandwidth for VoIP
- Class-based Bandwidth Guarantee by User-Defined Traffic Categories
- DiffServ Code Point Classifying
- 4-level Priority for each Direction (Inbound / Outbound)
- Bandwidth Borrowed
- Bandwidth / Session Limitation
|
7. Network Management
- Web-Based User Interface (HTTP / HTTPS)
- Quick Start Wizard
- CLI (Command Line Interface, Telnet / SSH*)
- Administration Access Control
- Configuration Backup / Restore
- Built-in Diagnostic Function
- Firmware Upgrade via TFTP / FTP
- Logging via Syslog
- SNMP Management MIB-II
|
8. Content Filter
- URL Keyword Blocking (White List and Black List)
- Java Applet , Cookies , Active X , Compressed , Executable , Multimedia File Blocking
- Web Content Filter
- Time Schedule Control
|
9. Network Features
- DHCP Client / Relay / Server
- Port-based VLAN
- Dynamic DNS
- NTP Client
- Call Scheduling
- RADIUS Client
- DNS Cache / Proxy
- UPnP
- Routing Protocol :
|
* Firmware Upgradeable |
| |
|
Technical Specifications of Vigor2930
|
| Hardware Interface |
LAN |
4-port 10/100 Base-TX Switch |
| WAN |
2-port 10/100 Base-TX Ethernet |
| Dual WAN |
Outbound Policy-Based Load-Balance |
| BoD (Bandwidth on Demand) |
| WAN Connection Fail-over |
| SSL VPN |
Up to 30 SSL VPN Tunnels |
| SSL Web Proxy |
| WAN Protocol |
DHCP Client |
| Static IP |
| PPPoE |
| PPTP |
| L2TP* |
| BPA |
| Firewall |
CSM (Content Security Management) for IM / P2P Applications |
| Multi-NAT, DMZ Host , Port-Redirection and Open Port |
| Policy-Based Firewall |
| MAC Address Filter |
| SPI (Stateful Packet Inspection) |
| DoS / DDoS Protection |
| IP Address Anti-spoofing |
| E-Mail Alert and Logging via Syslog |
| Bind IP to MAC Address |
| VPN |
Up to 100 VPN Tunnels |
| Protocol : PPTP, IPSec , L2TP , L2TP over IPSec |
| Encryption : MPPE and Hardware-Based AES / DES / 3DES |
| Authentication : Hardware-Based MD5 , SHA-1 |
| IKE Authentication : Pre-shared Key and Digital Signature (X.509) |
| LAN-to-LAN , Teleworker-to-LAN |
| DHCP over IPSec |
| NAT-Traversal (NAT-T) |
| Dead Peer Detection (DPD) |
| VPN Pass-Through |
| VPN Backup |
| VPN Load-balance |
| Bandwidth Management |
QoS
|
Guarantee Bandwidth for VoIP |
| Class-based Bandwidth Guarantee by User-Defined Traffic Categories |
| DiffServ Code Point Classifying |
| 4-level Priority for each Direction (Inbound / Outbound) |
| Bandwidth Borrowed |
| Bandwidth / Session Limitation |
| Network Management |
Web-Based User Interface (HTTP / HTTPS) |
| Quick Start Wizard |
| CLI (Command Line Interface) / Telnet / SSH* |
| Administration Access Control |
| Configuration Backup / Restore |
| Built-in Diagnostic Function |
| Firmware Upgrade via TFTP / FTP |
| Logging via Syslog |
| SNMP Management with MIB-II |
| Content Filter |
URL Keyword Blocking (White list and Black list) |
| Java Applet , Cookies , Active X , Compressed / Executable / Multimedia File Blocking |
| Web Content Filter |
| Time Schedule Control |
| Network Features |
DHCP Client / Relay / Server |
| Dynamic DNS |
| NTP Client |
| Call Scheduling |
| RADIUS Client |
| DNS Cache / Proxy |
| UPnP |
| Port-Based VLAN |
| Routing Protocol |
Static Routing |
| RIP V2 |
| Temperature |
Operating : 0°C ~ 45°C |
| Storage : -25°C ~ 70°C |
| Humidity |
10% ~ 90% (non-condensing) |
| Max. Power |
18 Watt |
| Dimension |
L240.96 * W165.07 * H43.96 (mm) |
| Power |
DC 15V |
* Firmware Upgradeable
The Vigor2930 is a Dual-WAN router with policy-based load-balance, fail-over and BoD (Bandwidth on Demand) ; it also features advanced bandwidth control mechanisms such as IP-layer QoS, NAT session limitation, bandwidth borrowed, etc., to allow easy, flexible and reliable access control and bandwidth management.
|
| Dual WAN Application |
| It allows users to access Internet and combine the bandwidth of the dual WAN to speed up the transmission through the network. Each WAN port can connect to different ISPs, Even if the ISPs use different technology to provide telecommunication service (such as DSL, Cable modem, etc.). If any connection problem occurred on one of the ISP connections, all the traffic will be guided and switched to the normal communication port for proper operation. |
|
Figure 2. Dual WAN Application
|
|
| SSL VPN Application |
| Without the necessity of installing VPN client on individual PC, the Secure Socket Layer (SSL) virtual private network (VPN) facility lets remote workers connect to the office network at any one time. SSL is supported by standard web browsers such as FireFox and IE. For users of small offices and teleworkers who need to access enterprises's internal applications, file server and file sharing, Vigor2930 security router series allow up to 30 concurrent SSL sessions. |
|
Figure 3. SSL VPN Application
|
|
| Firewall & VPN Application |
The SPI (Stateful packet Inspection) firewall uses object-based design to make settings of firewall policies easy. The CSM (Content Security Management) feature enables more precise and efficient access control for IM (Instant Messenger) and P2P (Peer to Peer) applications. Furthermore, functions such as DoS / DDoS (Denial of Service / Distributed DoS) and URL / Web content filtering minimize security threats both inside and outside the network.
With hardware-based implementation of the VPN protocols, the Vigor2930VS supports up to 100 VPN tunnels in compliance with advanced protocols such as IPSec / PPTP / L2TP / L2TP over IPSec with AES / DES / 3DES for encryption and MD5 / SHA-1 for authentication. |
|
Figure 4. Firewall & VPN Application
|
|
| VPN Trunk Management |
It is a backup mechanism which can set multiple VPN tunnels as backup tunnel. It can assure the network connection not to be cut off due to network environment blocked by any reason.
VPN trunk includes four features - VPN Backup, VPN load balance, GRE over IPSec, and Binding tunnel policy.
|
Figure 5 . VPN Back-up Application
|
|
Figure 6. VPN Load-Balance Application
|
|
|
Interface of Vigor2930
|
| Hardware Interface |
LAN |
4-port 10/100 Base-TX Switch |
| WAN |
2-port 10/100 Base-TX Ethernet |
|
Temperature
|
Operating : 0°C ~ 45°C |
| Storage : -25°C ~ 70°C |
| Humidity |
10% ~ 90% (non-condensing) |
| Max. Power |
18 Watt |
| Dimension |
L240.96 * W165.07 * H43.96 (mm) |
| Power |
DC 15V |
|
|
|
 |