|
Q. How
to configure Airport Extreme card to connect with WPA-PSK
encryption ?
Airport settings:
1. Go to System Preference>Network>Airport then press add to configure Wireless profile.
2. Input AP's SSID as Network Name and select WPA personal as Wireless Security.
3. After selecting Wireless Security mode, the Password field will pop up. Please enter the TKIP key set on AP in the field.
4. Click Apply Now to make the profile enabled. Then Airport Extreme card will connect to the network automatically.
Vigor WLAN Router settings:
1. Go to Wireless LAN>General Setup page and configure SSID then click OK.
2. Go to Wireless LAN>Security Settings page to set WPA-PSK mode and Pre-Shared Key. Then click OK to save settings.
|
|
|
Page last modified : 13 October 2008 |