|
Q. Why
I failed to connect to Vigor Router wirelessly in "WEP or
WPA-PSK mode" ?
It may cause by the following reasons:
1. Your wireless card cannot recognize this mode.
Please use "WPA-PSK Only" mode instead or upgrade your wireless card's driver to the newest version.
2. The encryption mode of the wireless card has been changed.
If the wireless card has connected to Vigor Router with one encyption mode previously and then switches to another one, e.g. from WEP to WPA-PSK, the new connection may fail to establish. The problem comes from the wireless zero configuration (WZC) in Microsoft Windows system. It may still utilize the former settings for connection even though you have changed it. Please fixe the encrypted mode in each wireless card to avoid the situation.
|
|
|
Page last modified : 13 October 2008 |