|
Q.
Does VigorTalk support Hotline function ? How to achieve it
?
Under telnet command mode, VigorTalk supports the VoIP Hotline function.
Here comes the configuration process, please check the following steps and do the related hotline setting.
1. Set up an index/phone number on the dial plan.
1-1 Enter phone number
1-2 Enter the dial in/out SIP URL/account on the below index box.
P.S.: SIP URL means the SIP account of the callee which applied to Hotline.
2.Telnet command mode: Log in VigorTalk via telnet command
mode and type the related commands as below.
2-1 To enable hotline: voip sip endpt1 hotline 1;
2-2 To specify/define the hotline number : voip sip
endpt1 hlidx 1;
2-3 Hotline status update: voip sip endpt1 ?
3. Check the "current sip endpt1 info" to
see if the setup is configured correctly.
4. VigorTalk will dial to 0702052023@sip.ttn.net as the phone is picked up.
|
|
|
Page last modified : 13 October 2008 |