|
Q.
How do I install my Intel AnyPoint 3240 USB ADSL modem into
Vigor2200 USB?
Please follow the procedures below.
1. Please upgrade both your router's firmware and router tools
to the latest edition. You may refer to this following link:
Ways for firmware
upgrade to get more information.
2. Please download the intel3240.cfg.
3. From the router tools in the program group, utilize "DSL
USB Modem Firmware Installer" to load the interl3240.cfg file.
a. Click to open the "USB Driver Install"
utility from Start/Programs/Router Tools/ USB Driver
Install.
b. Select the "Intel Pro/DSL 3240" as DSL
USB Modem and press the "GO" button.
c. Select the "Load" button and next select
the intel3240.cfg file.
d. Next please select the target router and
click the "Install" button.
e. The inter3240.cfg file is being loaded
into the router.
f. At this stage, the intel3240.cfg file
is successfully load into Vigor.
4. Open the router's web configurator to configure the DSL
Modem settings as shown below.
a. Click the "Auto detect ATM/DSL settings"
button from Main Menu -› Quick Setup -›
Internet Access Setup then Vigor2200 USB will automatically
detect the parameters for DSL connection, e.g. VCI/VPI.
b. Please input your user name and password
from Main Menu -› Quick Setup -› Internet
Access Setup -› PPPoE/PPPoA Client Mode.
5. Now you may test to dial up the DSL connection via this
following link Main Menu -› System Management
-› Diagnostic Tools -› PPPoE/PPPoA Diagnostics.
Then you should be able to access the Internet successfully. |
|
|
Page last modified : 13 October 2008 |