|
Q. How
to set up the ISDN LAN to LAN profile?
Please follow these steps below to setup the ISDN LAN to LAN
profile.
1. Please choose the country code and input the Own Number
of the ISDN line via ISDN Setup.
2. Then please marked the Enable ISDN Dial-In option to allow
ISDN remote access, including remote dial-in and LAN to LAN
access.
3. Creating a LAN to LAN profile at Head office.
| a. Common Settings: Please enable this
profile, choose "Dial-In" as the Call Direction, and
setup the Idle timeout. |
| b. Dial-in Settings: Choose the allow
Dial-in Type and specify a username and password for
authenticating remote client. |
| c. TCP/IP Settings: Specify the network
identification of the remote network.(IP and mask). |
4. Creating a LAN to LAN profile at Branch office.
| a. Common Settings: Please enable this
profile, choose "Dial-Out" as the Call Direction, and
setup the Idle timeout. |
| b. Dial-out Settings: Choose the Dial-out
Type and specify the ISDN dial number for dial up,and
specify the username and password for authentication
by remote server. |
| c. TCP/IP Settings: Specify the network
identification of the remote network.(IP and mask) |
|
|
|
Page last modified : 13 October 2008 |