|
Q.
Why does Vigor router ignore the specified internal DNS servers
and always send the ISP's DNS servers to its DHCP clients?
With the old firmware, the DNS servers assigned by ISP will
have a higher priority than those manually specified in the
DHCP configuration of Vigor router. To make the specified
DNS servers come into force, a telnet command " srv dhcp
frcdnsmanl on " is necessary.
But with the latest released firmware of some models, including
Vigor2900 series / Vigor2900V series / Vigor2500 series /
Vigor2600G series / Vigor2600V series etc, that telnet command
is no longer needed. Router will automatically assign the
specified DNS server to the DHCP clients.
|
|
|
Page last modified : 13 October 2008 |