|
Establishing PPTP
tunnel from WinXP PC to Vigor Router over Wireless connection
in the same LAN.
VPN Server (Vigor Router) settings:
a. Select "WEP 64 Bit" for the wireless connection.
b. Select Wireless LAN setup -› Access Control.
c. Tick "Enable Access Control".
d. Enter the MAC Address for the wireless NIC, tick "Must
Use VPN over WLAN", and click "Add".
e. Enter the VPN Server IP Address for WLAN, and click "OK".
f. From the Main menu, select VPN and Remote Access Setup
-> Remote Access User Setup (Tele-worker).
g. Tick "Enable this account".
h. Select PPTP.
i. Enter the username and password.
j. Click "OK" to complete setup of wireless connection at
the Vigor router.
k. From Main menu, select System Management -> VPN Connection
Management and dial (meaning to make connection) and check
the connection status. The green text shows the status of
the connection.
Client Settings:
a. In the client PC, type a Network name for SSID and select
either 40-bit or 64-bit WEP for the wireless connection.
b. Release or renew IP to check that the wireless interface
has obtained the correct IP address and subnet mask 255.255.255.252.
c. Download DrayTek's Smart VPN Client tool from Downloads
. Select your router code and download the respective VPN
tool. Install the downloaded tool on the PC.
d. From the Start menu, click All Programs -› Smart
VPN Client.
e. Click "Configure" and restart the computer.
f. Click setup.
g. Type the VPN Server's IP, User Name, and Password. Select
"PPTP" and click "OK".
h. Click "Connect" to establish the Dial-in connection.
|
|
|
Page last modified : 13 October 2008 |