|
1. Connect to Vigor Wireless router and apply a certificate
from CA server.
2. Select Require certificate from CA server.
3. Select User Certificate on the request
type.
4. Then the CA server will send the certificate for you.
5. Click the URL and finish the certificate installation.
6. You could verify the certificate on IE/Tools/Internet Options/Content/Certificates.
7. Configurate the properties of your Wireless Networks.
8. Enable Data encryption(WEP enable) and
This key is provided for me automatically
as below.
9. Enable network access control using IEEE802.1x on Authentication
option.
10. Right-click your wireless network and select View
Available Wireless Networks.
11. Select your Vigor router (don't input any key in it) and
press the Connect button.
12. Then you could get a wireless connection via 802.1x authentication.
13. If you have install Service Pack 1/1a, please enable Data
encryption(WEP enable) and This key is provided
for me automatically on Association option.
14. Enable network access control using IEEE802.1x on Authentication
option.
15. Select your Vigor router (don't input any key on it) and
press the Connect button.
16. Finally you could also get a wireless connection via 802.1x
authentication for WinXP SP1/1a.
|
|
|
Page last modified : 13 October 2008 |