|
Vigor Router
to Nortel ( Contivity 200 Series VPN Switch ) with IPSec tunnel
:
If Vigor Router is configured add the VPN client,
please follow the Setup below :
1. Common Settings :
a. Type the Profile Name.
b. Select " Enable this
Profile ".
c. Select WAN Interface for VPN Connection Through.
d. Select Dial-Out and set the Idle Timeout as 0 to retain this tunnel till terminated by the remote site.
If Always on is selected, please select " Enable
PING to Keep alive" and type the any remote
network IP in the " PING to the IP "
field, Vigor will try to reconnect if the tunnel is broken.
2. Dial-Out Settings :
a. Enable the IPSec tunnel.
b. Type the IP address or host name
of VPN server.
c. Type the IKE pre-shared Key.
d. Enable the IPSec Security Method
and select DES with Authentication.
3. In TCP / IP Network Settings :
Fill in the Remote Network IP and
Remote Network mask.
Nortel setup :
1.
2.
3.
|
|
|
Page last modified : 13 October 2008 |