|
Vigor2200 series Settings(Dial Out)
From the Setup Main Menu select " IKE/IPSec Setup ".
Fill in the Pre-Shares Key password entered in Checkpoint.
Choose High (ESP) with DES or 3DES.
Select " LAN-to-LAN Dialer Profile Setup " and click
on the index 1 for the first profile.
In this example the Profile Name will be VPNtoCP.
At this point, both VPN gateways should be appropriately configured
to pass traffic between the two networks. A simple ping test
displays the following in the Check Point Log Viewer. There
should be Key Install messages for IKE Phase 1 and Phase 2,
as well as encryption / decryption for the traffic passed.
(You will need to expand the width of the Info field to see
the complete message.
|
|
|
Page last modified : 13 October 2008 |