|
a. Remote Dial-in Server (Vigor Router) settings
:
1. In Vigor's web configuration page, click VPN and Remote
Access setup> Remote Dial-in Users Setup. Then click the
Index to setup the Remote Dial-in User Account.
2. Type in the username and password for this remote dial-in
user, then click OK. Now this specified user can dial-in to
Vigor router now.
3. When the user successfully dials in, you may see the connection
status in System Management > VPN Connection Management.
BR>
b. Client Settings :
1. Create a New Connection by selecting " Start ->
Settings -> Network and Dial-up Connections -> Make
New Connection".
2. Click Next to advance to the next step.
3. Select "Connect to a private network through the Internet",then
click Next.
BR>
4. Select "Do not dial the initial connection."
then click Next.
5. Type the IP address or host name of VPN server.
6. elect "For all users", then click Next.
7. Do not enable sharing for this connection. Click Next.
8. Type in the name you want to use for this connection and
lick Finish to complete the wizard initialization.
9. Click "Properties" in the pop-up window.
10. Select the Security tab, then click "Settings".
11. In the Data encryption field, select Optional encryption
(connect even if no encryption).
Select only PAP and CHAP in the "Allowed these protocols"
action.
Click OK.
12. Select the Networking tab.
In the Types of VPN option, select PPTP VPN.
Click "Settings".
13. Disable all the three items in the PPP settings window.
14. Type the username and password in the pop-up window, the
click Connect.
15. Now you can see the authentication process status.
16. Dial-in connection is established. |
|
|
Page last modified : 13 October 2008 |