|
To register at a SIP server, you
can configure SIP registered settings via Router Web Configurator
-› VoIP Setup -› SIP Related Function Setup. However,
the VoIP interface for V model routers are a little bit different.
Please refer to the pictures for each V model router below:
• Vigor2600V / Vigor2900V
Enter the domain name (or IP address) of your registered SIP
Registrar server, registered name and password.
Telnet into Vigor, type ' voip sip registrar
' to ensure the register is successful.
• Vigor2100V / Vigor2200V
/ Vigor2500V
Enter the domain name (or IP address) of your registered SIP Registrar server to Registrar, Account Name and Password.
Then you can check if the register is successful via Router
Web Configurator -› VoIP -› VoIP Call Status.
(R) means you have registered at the SIP server.
|
|
|
Page last modified : 13 October 2008 |