|
True-IP DMZ Application.
Example 2 - WAN use PPPoE connection
In some cities of China, the broadband services require strict Web login/ Authentication before any Internet access can be through. It is expected that a True-IP DMZ host can carry out the login/authentication smoothly.
Step 1 - Setup True IP DMZ host
Refer to the Setp 1 in Example 1
Step 2 - Setup Vigor 2104?s WAN connection
Enter Quick Setup > Internet Access Setup and click PPPoE.
Enable PPPoE link.
Fill in Username/Password.
Click Always On.
Step 3 - Setup True IP DMZ in Vigor2104
Refer to the Setp 3 in Example 1.
Step 4 - Get the public IP
After the router has rebooted, go to Online Status page and confirm the router has connected to the ISP. Although the router has obtained a public IP address, you can't access the Internet at present for the ISP requires strict Web login/Authentication.
Open the Command Prompt, type the command ipconfig/release, then ipconfig/renew. You will find Vigor 2104 assigns the WAN IP and associate default gateway to the True-IP DMZ host.
Open the web browser and access your ISP?s website for authentication. Then you may run ping from other PCs connected behind the Vigor2104 to confirm if you can access the Internet.
|
|
|
Page last modified : 13 October 2008 |