Products Center Security Broadband Router Vigor2900Vi
         Printable page     
Related Links
Live Web Demo
Specifications
Applications Figure
ITSP Applications Figure
QoS Applications Figure
Datasheet
Quick Start Guide
R&TTE Certification
FAQ
Application Note
Downloads
Where to buy
   ~~ If you are interested in the product, please contact the local distributor ~~
 Technical Specifications of Vigor2900Vi
 Hardware Interface  LAN  4-port 10/100 Base-TX Switch with port-based VLAN
 WAN  1-port 10/100 Base-TX port with a RJ-45 connector
 ISDN  1-port ISDN BRI with RJ-45 connector
 Printer  1-port USB for connecting to USB printer
 VoIP  2-port FXS
 WAN Protocol  PPPoE / DHCP / PPTP / Static IP
 VoIP  DSP Feature  G.168 Line Echo-cancellation
 Gain control
 Jitter buffer ( 125ms )
 VoIP codec  G.711 A / µ law / G.723.1 / G.726 / G.729 A / B
 VAD / CNG
 DTMF  Inband / Outband ( RFC-2833 ) / SIP INFO
 Tone Generation & Detection  DTMF /  Dial / Busy / Ring Back
 Protocol  SIP / RTP / RTCP
 Up to 60 DialPlan
ISDN Features  Compatible with Euro ISDN
 Uses ISDN for shared Internet access (dial-on-demand)
 Support for 64Kb/s and 128Kb/s (Multilink-PPP)
 Automatic ISDN backup
 Bandwidth-on-demand (automatically switches between 64Kb/s and 128Kb/s)
 Direct ISDN dial-up LAN-to-LAN connectivity (to another ISDN site) and VPN
 Remote "teleworker" direct dial-in access to your LAN (from a remote ISDN line)
 Remote activation of Internet dial-up
 NAT  Multi-NAT
 DMZ
 Port Redirection
 Open Ports
 Pass-thru (VPN, VoIP, NetMeeting, MSN Messenger, ICQ, Quake...etc.)
 Firewall  IM blocking / RIP blocking
 Stateful Packet Inspection
 DoS / DDoS protection
 User-configurable IP packet filtering
 VPN  Up to 32 Tunnels
 Protocol  PPTP / L2TP / IPSec / L2TP over IPSec
 Encryption  AES (128 bits )
 MPPE (40,128 bits)
 Hardware-based DES / 3DES (56 / 168 bits )
 Authentication  MD5, SHA-1
 IKE Authentication  Pre-shared Key
 Connection  Teleworker-to-LAN
 LAN-to-LAN
 DHCP over IPSec
 IPSec Pass-through
 Network Features  DHCP server / relay / client
 DNS cache and proxy
 Dynamic DNS
 SNTP client
 Call scheduling
 RADIUS client
 UPnP
 Port-based VLAN
 Rate control
 Routing protocol  Static routing / RIP V2
 QoS  Class-based bandwidth guarantee by user-defined traffic categories
 Rule-based classification (IP / Port / DiffServ Code Point )
 4-level priority for each direction ( Inbound / Outbound )
 Bandwidth borrowed
 URL Filtering  URL Blocking with Exception Handling
 Java/ActiveX/Cookies/Zip/EXE Blocking
 Executable/Compressed/multimedia file Blocking
 URL Blocking by User-defined keywords
 Time Schedule support
 Management  Web-base user Interface ( HTTP / HTTPS )
 Command Line Interface ( Telnet )
 Administration access control list
 Configuration backup / restore
 Build-in diagnostic function
 Firmware upgrade via TFTP
 Remote firmware upgrade via FTP
 Quick start wizard
 Logging via syslog
 SNMP management MIB-II
 Max. Power  10 Watt
 Dimension  L22.0 * W16.0 * H3.67 (cm)
 Power  DC 12-15V

Page last modified : 09 September 2008