|
~~ If you are interested in the product, please
contact the local
distributor ~~
Technical
Specifications of Vigor2500 |
| Hardware Interface |
LAN |
4-port 10/100M Base-TX Switch |
| ADSL |
RJ-11 WAN Port for AnnexA |
| RJ-45 WAN Port for AnnexB |
| ADSL Protocol |
PPP over ATM (RFC 2364 ) |
| PPP over Ethernet (RFC 2516 ) |
| Bridged/Routed Ethernet over ATM (RFC 1483/ RFC 2684 ) |
| ADSL Compliance |
ANSI T1.413, G.DMT, G.Lite, Auto mode |
| Up to 8Mbps downstream, 1Mbps upstream |
| NAT |
Multi-NAT |
| DMZ |
| Port Redirection |
| Open Ports |
| Pass-thru (VPN, VoIP, NetMeeting, MSN Messenger, ICQ,Quake...etc.) |
| Virtual Private Network |
Max to 2 tunnels |
| IKE, Key Management |
| IPSec, PPTP, L2TP, L2TP over IPSec |
| 3DES, DES and AES encryption |
| MPPE encryption for PPTP |
| RADIUS support |
| Firewall Features |
Access Control |
| IP-based Packet Filtering |
| Stateful Packet Inspection |
| Denial of Service Prevention |
| Routing Support |
RIPV2 |
| Configurable Static Route |
| Network Features |
DHCP Server/relay |
| Dynamic DNS |
| Call Scheduling |
| Management |
Web-based user interface |
| Telnet emote access support |
| TFTP/FTP for Firmware upgrade/backup |
| SNMP support |
| Built-in Diagnostic Function |
| Quick Start Wizard |
| Syslog Monitor |
| Max. Power |
10 Watt |
| Dimension |
L19 * W11 * H3 (cm) |
| Prower |
AC 9V |
|
| |
Page last modified : 09 September 2008 |