|
|
Products Center
Dual WAN Security Router
Vigor2930VSn |
|
|
1.
Dual-WAN
- Outbound Policy-Based Load-Balance
- BoD ( Bandwidth on Demand )
- WAN Connection Fail-over
|
2. VoIP
- Protocol : SIP, RTP / RTCP
- One Dozen SIP Registrars
- G.168 Line Echo-cancellation
- Automatic Gain Control
- Jitter Buffer ( 125ms )
- Voice Codec :
- G.711 A / µ law
- G.723.1
- G.726
- G.729 A / B
- VAD / CNG
- Tone Generation and Detection :
DTMF, Dial , Busy , Ring Back , Call
Progress
- DTMF Tone :
- In Band / Out Band ( RFC-2833
) / SIP Info
- FAX / Modem Support :
- G.711 Pass-Through
- T.38 for FAX
- Supplemental Services :
- Call Hold / Retrieve
- Call Waiting
- Call Waiting with Caller ID
- Call Transfer
- Call Forwarding ( Always , Busy
and No Answer )
- DND ( Do not Disturb )
- Call Barring ( Incoming / Outgoing
)
- MWI ( Message Waiting Indicator
) ( RFC-3842 )
- Hotline
- ISDN Loop-Through
- ISDN On-net / Off-net
|
3. Wireless Access Point
- IEEE 802.11n Compliant
- Wireless Client List
- Access Point Discovery
- WDS ( Wireless Distribution System
)
- Wireless LAN Isolation
- Wireless Rate-Control
- 64 / 128-bit WEP
- WPA / WPA2
- 802.1X Authentication with RADIUS
Client*
- Hidden SSID
- Multiple SSIDs
- MAC Address Access Control
|
4. ISDN
- One ISDN Port Fixed for ISDN Phone
and One ISDN Port Configurable for
ISDN Phone / Line
- Euro ISDN Compatible
- Automatic ISDN Backup
- Support 64 / 128Kbps ( Multilink-PPP
) / BoD ( Bandwidth on Demand )
- Remote Dial-In / LAN-to-LAN Connection
- Remote Activation
- Bypass the Upper and Lower ISDN
Port During Power Cut
|
5. WAN Protocol
- DHCP Client
- Static IP
- PPPoE
- PPTP
- L2TP*
- BPA
|
6. Firewall
- CSM ( Content Security Management
) for IM / P2P Applications
- Multi-NAT, DMZ Host , Port-Redirection
and Open Port
- Policy-Based Firewall
- MAC Address Filter
- SPI ( Stateful Packet Inspection
)
- DoS / DDoS Protection
- IP Address Anti-spoofing
- E-Mail Alert and Logging via Syslog
- Bind IP to MAC Address
|
7. VPN
- Up to 100 VPN Tunnels
- Protocol : PPTP, IPSec , L2TP ,
L2TP over IPSec
- Encryption : MPPE and Hardware-Based
AES / DES / 3DES
- Authentication : Hardware-Based
MD5 , SHA-1
- IKE Authentication : Pre-shared
Key and Digital Signature ( X.509
)
- LAN-to-LAN , Teleworker-to-LAN
- DHCP over IPSec
- NAT-Traversal ( NAT-T )
- Dead Peer Detection ( DPD )
- VPN Pass-Through
|
8. SSL VPN
- Up to 30 SSL VPN Tunnels
- SSL Web Proxy
|
9. Bandwidth Management
- QoS :
- Guarantee Bandwidth for VoIP
- Class-based Bandwidth Guarantee
by User-Defined Traffic Categories
- DiffServ Code Point Classifying
- 4-level Priority for each Direction
( Inbound / Outbound )
- Bandwidth Borrowed
- Bandwidth / Session Limitation
|
10. Network Management
- Web-Based User Interface ( HTTP
/ HTTPS )
- Quick Start Wizard
- CLI ( Command Line Interface, Telnet
/ SSH*
)
- Administration Access Control
- Configuration Backup / Restore
- Built-in Diagnostic Function
- Firmware Upgrade via TFTP/FTP
- Logging via Syslog
- SNMP Management MIB-II
|
11. Content Filter
- URL Keyword Blocking ( White List
and Black List )
- Java Applet , Cookies , Active X
, Compressed , Executable , Multimedia
File Blocking
- Web Content Filter ( SurfControl
)
- Time Schedule Control
|
12. Network Features
- DHCP Client / Relay / Server
- Port-based VLAN
- Dynamic DNS
- NTP Client
- Call Scheduling
- RADIUS Client
- DNS Cache / Proxy
- UPnP
- Routing Protocol :
|
*
Firmware Upgradeable |
|
|
Technical
Specifications of Vigor2930VSn |
| Hardware
Interface |
LAN |
4-port 10/100 Base-TX
Switch |
| WAN |
2-port 10/100 Base-TX
Ethernet |
| VoIP |
2-port FXS |
| WLAN |
IEEE 802.11n |
| ISDN S0 |
One fixed NT mode ,
and one configurable NT / TE mode |
| Dual-WAN |
Outbound Policy-Based
Load-Balance |
| BoD ( Bandwidth on
Demand ) |
| WAN Connection Fail-over |
| VoIP |
Protocol |
SIP , RTP / RTCP |
| One Dozen SIP Registrars |
| G.168 Line Echo-cancellation |
| Automatic Gain Control |
| Jitter Buffer ( 125ms
) |
| Voice
Codec |
G.711 A / µ
Law |
| G.723.1 |
| G.726 |
| G.729 A / B |
| VAD / CNG |
| Tone Generation and
Detection |
DTMF , Dial , Busy , Ring Back
, Call Progress |
| DTMF Tone |
In Band / Out Band ( RFC-2833
) / SIP info |
| FAX /
Modem Support |
G.711 Pass-through |
| T.38 for FAX |
| Supplemental Services |
Call Hold / Retrieve |
| Call Waiting |
| Call Waiting with Caller
ID |
| Call Transfer |
| Call Forwarding (
Always , Busy and No Answer ) |
| DND ( Do not Disturb
) |
| Call Barring ( Incoming
/ Outgoing ) |
| MWI ( Message Waiting
Indicator ) ( RFC-3842 ) |
| Hotline |
| ISDN Loop-Through |
| ISDN On-net / Off-net |
| Wireless Access
Point |
IEEE 802.11n Compliant |
| Wireless Client List |
| Access Point Discovery |
| WDS ( Wireless Distribution
System ) |
| Wireless LAN Isolation |
| Wireless Rate-Control |
| 64 / 128-bit WEP |
| WPA / WPA2 |
| 802.1X Authentication with
RADIUS Client*
|
| Hidden SSID |
| Multiple SSIDs |
| MAC Address Access Control |
| ISDN |
One ISDN Port Fixed for
ISDN Phone and One ISDN Port Configurable for
ISDN Phone / Line |
| Euro ISDN Compatible |
| Automatic ISDN Backup |
| Support 64 / 128Kbps (
Multilink-PPP ) / BoD ( Bandwidth on Demand
) |
| Remote Dial-In / LAN-to-LAN
Connection |
| Remote Activation |
| Bypass the Upper and Lower
ISDN Port During Power Cut |
| WAN Protocol |
DHCP Client |
| Static IP |
| PPPoE |
| PPTP |
| L2TP*
|
| BPA |
| Firewall |
CSM ( Content Security
Management ) for IM / P2P Applications |
| Multi-NAT, DMZ Host ,
Port-Redirection and Open Port |
| Policy-Based Firewall |
| MAC Address Filter |
| SPI ( Stateful Packet
Inspection ) |
| DoS / DDoS Protection |
| IP Address Anti-spoofing |
| E-Mail Alert and Logging
via Syslog |
| Bind IP to MAC Address |
| VPN |
Up to 100 VPN Tunnels |
| Protocol : PPTP, IPSec
, L2TP , L2TP over IPSec |
| Encryption : MPPE and
Hardware-Based AES / DES / 3DES |
| Authentication : Hardware-Based
MD5 , SHA-1 |
| IKE Authentication : Pre-shared
Key and Digital Signature ( X.509 ) |
| LAN-to-LAN , Teleworker-to-LAN |
| DHCP over IPSec |
| NAT-Traversal ( NAT-T
) |
| Dead Peer Detection (
DPD ) |
| VPN Pass-Through |
| SSL VPN |
Up to 30 SSL VPN Tunnels |
| SSL Web Proxy |
| Bandwidth Management
|
QoS |
Guarantee Bandwidth for
VoIP |
| Class-based Bandwidth
Guarantee by User-Defined Traffic Categories |
| DiffServ Code Point Classifying |
| 4-level Priority for each
Direction ( Inbound / Outbound ) |
| Bandwidth Borrowed |
| Bandwidth / Session Limitation |
| Network Management
|
Web-Based User Interface
( HTTP / HTTPS ) |
| Quick Start Wizard |
| CLI ( Command Line Interface
) / Telnet / SSH*
|
| Administration Access Control |
| Configuration Backup /
Restore |
| Built-in Diagnostic Function |
| Firmware Upgrade via TFTP
/ FTP |
| Logging via Syslog |
| SNMP Management with MIB-II |
| Content Filter
|
URL Keyword Blocking (
White list and Black list ) |
| Java Applet , Cookies
, Active X , Compressed / Executable / Multimedia
File Blocking |
| Web Content Filter ( SurfControl
) |
| Time Schedule Control |
| Network Features
|
DHCP Client / Relay /
Server |
| Dynamic DNS |
| NTP Client |
| Call Scheduling |
| RADIUS Client |
| DNS Cache / Proxy |
| UPnP |
| Port-Based VLAN |
| Routing Protocol |
Static Routing |
| RIP V2 |
| Temperature |
Operating : 0°C ~ 45°C |
| Storage : -25°C ~ 70°C |
| Humidity |
10% ~ 90% ( non-condensing
) |
| Max. Power |
18 Watt |
| Dimension |
L240.96 * W165.07 * H43.96
( mm ) |
| Power |
DC 15V |
|
*
Firmware Upgradeable |
The Vigor2930 is a Dual-WAN router with policy-based
load-balance, fail-over and BoD ( Bandwidth on Demand
) ; it also features advanced bandwidth control mechanisms
such as IP-layer QoS, NAT session limitation, bandwidth
borrowed, etc., to allow easy, flexible and reliable
access control and bandwidth management.
|
| Dual
WAN Application |
| It allows users to access Internet and
combine the bandwidth of the dual WAN to speed up
the transmission through the network. Each WAN port
can connect to different ISPs, Even if the ISPs use
different technology to provide telecommunication
service (such as DSL, Cable modem, etc.). If any connection
problem occurred on one of the ISP connections, all
the traffic will be guided and switched to the normal
communication port for proper operation. |
Figure 2. Dual WAN
Application |
|
| VoIP
& ISDN Application |
| Vigor2930 "V" models provide twin analogue
phone ports. "S" models support two ISDN
ports. Combining the characteristics of "V"
and "S" models, "VS" models can
offer two ISDN ports additionally besides analogue
phone ports. ISDN S0 port is dedicated to for ISDN
phone; another ISDN port is configurable for ISDN
line and phone. It supports multiple SIP registrars
with highly flexible configuration and call handling
options. |
Figure 3. VoIP &
ISDN Application |
|
| Firewall
& VPN Application |
The SPI ( Stateful packet Inspection
) firewall uses object-based design to make settings
of firewall policies easy. The CSM ( Content Security
Management ) feature enables more precise and efficient
access control for IM ( Instant Messenger ) and P2P
( Peer to Peer ) applications. Furthermore, functions
such as DoS / DDoS ( Denial of Service / Distributed
DoS ) and URL / Web content filtering minimize security
threats both inside and outside the network.
With hardware-based implementation of
the VPN protocols, the Vigor2930 supports up to 100
VPN tunnels in compliance with advanced protocols
such as IPSec / PPTP / L2TP / L2TP over IPSec with
AES / DES / 3DES for encryption and MD5 / SHA-1 for
authentication. |
Figure 4. Firewall &
VPN Application |
|
|
|
|
Page last modified : 04 July 2008 |